1 / 4
Prusa XL enclosure RPi Zero Camera
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry PI camera case for Prusa XL enclosure
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 45
- Makes
- 1
- Views
- 296
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Raspberry Pi Camera v3 / Zero case for Prusa XL enclosure.
Camera and Pi screws into the extra holes on the enclosure frame. Case is very simple and has a lot of openings to make sure there is as much airflow as possible given the high ambient temperature inside the enclosure.
Image captured from the camera is using the genuine Raspberry Pi Wide angle camera (V3) but any camera with the same form factor should work.
Prints well without supports.
Extra hardware needed:
- 3x M3 (nyloc) nut
- 3x M3x10 screw
- 6x M2 (nyloc) nut
- 6x M2x16 screw
- Micro-USB cable with 90 degree connector