ZeroG E5P Filament Sensor Mount w/ Double Compression Fittings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount that can be used to attach bowden compression fittings on both sides of the stock E5P filament runout sensor.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I currently use an Eibos Cyclopes filament dryer, but the bowden tube coming from it did not connect directly with my filament runout sensor. I found Matt M's model that added the compression fitting to one side and modified it to have one on each side. This allows for the filament to remain in the bowden tube all the way from my dryer to the extruder.
.3mf file is set up for AtomicFilament PETG (extruder: 240C; bed: 70C). I have not attempted it without supports, but I'm not sure if it's possible because of the shape/route of the bottom of the fitting mounts.
Holes beside the fitting mounts use M3 screws and 2020 rail nuts. I just used the original screws that came with the runout sensor and they will screw in snugly without needing a heat set.
Note: I am waiting on my compression fittings and will add additional pictures once they arrive and I get everything assembled and installed.