1 / 3
Gopher On Fire Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
panic("I am on fire!!!")
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
The Go Gopher, but on fire, as a magnet! Two versions, one that has holes for 8x3mm magnets and another for 10x2mm magnets.
- MMU required for the colors, needs 5 different colors. I used the orange for the flame and mouth.
- For the 10x2mm magnet, pause at layer 14 to add magnets
- For the 8x3mm magnet, pause at layer 19 to add magnets
- Recommend printing it face down, I used a textured print sheet which I thought gave it a nice look.
note: For the 10x2mm magnets, mine measure 10x1.5mm but were sold as 10x2mm hopefully that doesn't cause any problems.