Dial gauge holder for Prusa MINI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dial gauge holder for Prusa MINI, holding shaft diameter of 8 mm
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 140
- Makes
- 1
- Views
- 1,864
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This dial gauge holder is screwed to the heat sink with a M3x10 screw. Dial gauges with a shaft diameter of 8 mm can be clamped with it. Without the dial gauge mounted, the holder does not interfere with mesh bed leveling or homing.
Tip for use: After mesh bed leveling, the firmware attempts to compensate for the deviations determined by moving the Z axis when moving the X and Y axes. A NEMA (extruder) motor rotation indicator on the Z-axis motor helps to detect this.
If you want to avoid that the firmware corrects with the Z-axis, you should only perform an XY homing after switching on the printer.
Please take a look at my feet for the Mini.