Geared Phone stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geared Phone stand-holder
- Rating
- 4.927 / 5
- Likes
- 7,983
- Downloads
- 45,288
- Makes
- 363
- Views
- 143,647
- Reviews
- 328
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not move under load.
The Print-in-place version of the model cannot be disassembled.
During the first tests, I found that the first one could be disassembled, so I added separate parts if you wanted to have a holder in different colors.
26.2. Update !! Added number of cutouts in the locking cylinder for finer adjustment of the holder angle. From 4 to 8 cutouts.
If there is a problem with releasing the Aretation part, turn the knob a little sideways or tap on the hexagon. The tolerance between the parts should allow separation without problems. Try downloading the model again, I uploaded looser parts
Optional model with fine angle locking added - entire Print-in-place holder, also individual parts - with 12 locking cutouts
24.3. UPDATE !!!
Added after comments, the part of the Gear Holder arch that holds the phone has a cutout for better control of the phone,files are in the Gear Holder with Cut-out directory
