Counting matching models…
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
Built this as a fun challenge. Indexes off cutting edge, bar side, and adjacent tooth. Magnifies height of raker by about 14X. Indicator can be centered by screw adjustment. Metal at all potential wear points. Uses a drill bit for contact…
For the gears, I suggest printing with a brim. There is also a small amount of play in the gears; I couldn’t make it perfect because the gears are small. The housing for the trident was incorrect in Symetrical Mod, I replaced it with the…
Modeled after 70 rpm 6V Version from Amazon, probably the same dimensions as many others. Gearbox only modeled as a mockup.
These parts are used to implement a spindle encoder on a 9x20 lathe using an Omron e6b2 encoder. This is useful if you are using a CNC conversion of the lathe. The LatheSpindleGT2 print replaces both the spindle gear and spacer. (assumes…
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a 52/11 :1 ratio. Instructions Printed in ABS with 0.2mm layers. I had to clean out the bolt holes. Used 3mm flat head…
Printed out the Extraplanetary Geared Stand, but found the little prongs that the phone sits on were too narrow. https://www.printables.com/model/1278870-extraplanetary-geared-stand I've made a little exetension piece which is longer and…
My previous replacement arm parts were designed for FDM printers. This design is intended for resin printers. I had to press fit this together with pliers. I may go back and design a larger drive gear for a thumb to roll open and closed,…
An option for those who do not want to buy a hook and bearing. I managed to print this hook using a border and a slow 3D printer speed. Material PETG.
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…
Huge update (May 2021) I've always wanted to have a custom version of the deck box for each of the Magic: The Gathering colours. Now, I have developed individually textured boxes for each colour, featuring a variety of artwork, from Dutch…
Huge update (May 2021) I've always wanted to have a custom version of the deck box for each of the Magic: The Gathering colours. Now, I have developed individually textured boxes for each colour, featuring a variety of artwork, from Dutch…
Huge update (May 2021) I've always wanted to have a custom version of the deck box for each of the Magic: The Gathering colours. Now, I have developed individually textured boxes for each colour, featuring a variety of artwork, from Dutch…
This is a variant of my traditional geared deck box. This box allows users to view their cards and identify their decks when the box is closed. Please note that this box is a much more challenging print than the original, with lots and…
Note: Photos show a textured box. This model does not have textured walls. • Description These files are an updated version of the free version of the CCG deck box. The most important improvement is that this version doesn't need any…
These files are an updated version of the free version of the CCG deck box. The most important improvement is that this version doesn't need any support, and includes numerous tweaks to make it easier to print. This design is for a 60…
Introducing the Customizable Angling System with Turbo Line Retriever or CastFlex. CastFlex features a spool winder with a 2:1 gear ratio for fast retrieving action also has a built in drag system that can be added if wished. The CastFlex…
I designed this deck box for my Lorcana decks, but it can be used for all your favorite tcg's Lid stays open with deck inserted and features an optional hole for a 5mm cube magnet. This is my first public design so it might still be…
The bevel gears hidden inside the rings causes them to rotate axially when agitated trans-axially. very amusing to idly spin. The center most ring acts as a bushing, and lets you spin the whole device on one's finger. Surely such…
A universal geared Planechase deck box. I'm making this model freely available for personal use (see license). When the box is opened the cards rise up "for easy access", and totally not "because it looks cool". The box locks closed with…
These bowls are actually working as a pair of gears. They look like bevel gear wheels, but technically, they are straight spur gears. They work perfectly well when sitting flat on the table. This was done by varying the profile shift…
When I was child I have that kind of toy, in that time it was made from iron (maby alluminium or smth, don't know I was child xD), so I think, can I design smth like this by my own, and here it is. Printing: -layer high: 0,2mm (this is…
I remixed the base only - added variator for the motor (need more heigh and square hole) and a mini power jack hole at he back Part list : https://www.amazon.fr/gp/product/B01EZPTTG6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1…
This is a geared hinge. Similar to some of the full length geared hinges available on the commercial market but these have the unique feature of holding the vertical weight with the herringbone gear face. Low friction and very sturdy. The…
Modified only the top right and bottom right files to accept Creality K1 & K1c Door Hinges Geared Print in Place https://www.printables.com/model/916563-creality-k1-k1c-door-hinges-geared-print-in-place it allows a full 270 degrees swing…
Hey all! Here's my geared maker coin that I designed for the Dec 2018 Prusa competition, designed in Fusion 360 and printed on my Mk2s with some PLA. Thanks to all the support from the Prusa Facebook Group and good luck to all the other…
Bottom Right and Top Right side braces modified to accept Creality K1 MAX Door Hinges Geared Print in Place
I like the design that @ESoderberg came up with, however I wanted to use these hinges with wood screws. Accordingly , I desired holes that worked well with countersunk screws instead of cap/button head screw styles. Such screws are common…
This is my go at it: Since I'm not good at modifying STLs, I modeled it from scratch: slightly smaller than original, higher tolerances (0.3mm per side) added gear instead of round side ;-) Real involute teeth with module 1.5 rounded…
Ho dovuto praticare un altro foro nella stampante per avvitare il bullone e tenere la porta
A fun winter themed fidget toy. Make sure to print the Print oriented version Assembly: Refer to the assembled 3d model At the bottom of every gear, there is a number. Get the base piece and slide the gears inside. Make sure that the…
Upload of my model created in August 2021. It was printed on a Prusa Mk3. This is simply a resize of: Deck Box with Gears Improved further by usefulparts Digimon Digi-Destined Crest Coasters by Blue Fenix Trading Card Divider by cy00488 I…
This is a very simple (and almost undoubtedly overbuilt) tool for aligning the geared springs included in many filament auto-rewind systems. The measurements and sizing for the tool were explicitly based on this model but are likely to…
Enclosure for the ubiquitous 28BYJ-48 5V geared stepper motors for the fischertechnik construction toy system with a small footprint of 30x30x30 mm. Comes with several shaft adapters. The 28BYJ-48 is very cheap and surprisingly powerful…
Remixed one of the front options to allow for a threaded heat inset instead of a captive nut for the idle tension knob.
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
This is just a different approach to a Gondola for a Polargraph robot. My main goal was to get the pen up and down to a smooth linear motion and make it easy to change colors. You need: 2 x 6806-2RS Bearrings (30x42x7mm) 1 x mg90 servo…
A geared phone holder with locating feature that constrains side-to-side movement. Also features a cutout for charging.
Summary This is a gloriously over-complicated box for storing cards, or anything else really. As the lid is opened the platform rises, presenting the cards. There are pre-layed-out plates! You can now select from 7 plates to greatly…
Tri-Geared Heart prints support free and snaps together right off the printer. With hearty axles and enclosed gears, it works well as a fidget or key chain with less breaking. It scales down cleanly to 50% for even cuter prints. Available…
Replacement Gear for K&F Concept Geared Tripod Head Overview If you've been using the K&F Concept geared tripod head, you may have experienced a common issue—broken or worn-out gears. Unfortunately, K&F does not sell replacement parts,…
An easier way to control the altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel, compared to the last remixes. Print the same as the other parts of your Hadley. You will have to…
This is a remix of prior geared hinge updated so that it can be printed in place as a single assembly. Tested with 210lb/95KG of weight using two hinges (as shown in second picture) with no sign of failure or sagging. Printed in PLA / .4…
A set of moving gears in the shape of a tooth. There is a pin model made with FreeCAD that is intended to take a pointy metal pin so the pin is stronger and easier to rotate. The pins_3x is the old plastic-only pin.
This fidget toy is great as an anti-stress or anti-anxiety tool. Experts say fidgets can help people concentrate, improving focus and lowering distraction to external factors. Others may argue they are simply fun :) To make this toy you…
Print all v2 panels you need except LEFT_HONEYCOMB_2_V2.stl and LEFT_HONEYCOMB_3_V2.stl (those were modified). Print attached LEFT_HONEYCOMB_2_V2_for_hinge.stl and LEFT_HONEYCOMB_3_V2_for_hinge.stl STLs using print settings as you used to…
This is a redo of my original x-tensioner so I could replace the idler bearing with a geared bearing to reduce belt vibration. This uses the same 5mm hardware that came with my printer. This is made to use a GT2 20 teeth idler pulley with…
This is my entry for the #CatchTheWind contest. This is a windmill that has a 11 to 1 gear reduction to enable you to do things that you just can't do without gearing. Things like pump water, power complicated whirligigs with many moving…
The tolerances were a little tight so I changed them in this version. Also fixed the weird looking hole on the large flap. UPDATE: I messed up the orientation, new model has the helical gears in the right orientation so that they can be…
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
Version 2 (recommended) works with all doors from 3-6mm thickness added a slotted hole on the mounting Side of the Door added a M5 Thread, so you just need Screws to fasten the “Spange” prevents from loosen the nuts For assembly for…
Hey there, wonderful people! Planetary gears are just the best! As a fan of making things overly complicated, it's hard to find a mechanism that looks more cool and mechanical than that. And the Planetary Phone Stand was always a…
This adaptation of an existing design allows a complete push-fit omni-wheel to be 3D printed - commercial omni-wheels are readily available but this provides a self-build option, albeit one that is somewhat time consuming to print and…
This little snake is a fun toy to fidget with. Because of the gears, it's movement is interesting! For printing, PrusaSlicer's default settings work perfectly. This really is a simple, quick print! For a simple three segment snake, you'll…
Pictures are version one in which the belt geometry is off (you can see the belt pulled in). attached files run the slider full height, and the face of it 5mm closer to the rod (should have the belt straight/much closer to straight).…
This model is intended to provide a starting point for anyone to make their own tuner to fit their instrument of choice. It has no mounting holes, so it really does require you to modify the design to fit your application. The gear ratio…
https://www.dfrobot.com/product-633.html Makes for a good representation while modeling.
This is hybrid between a tapered roller bearing, a herringbone gear set and a spiral bevel gear. it is ideal for use as a turntable roller bearing, taking mainly axial loads. It is self retaining/aligning with the parts kept in place…
This is just a single round gear which was made from the original files and can be used as an alternate end piece. No additional requirements for printing, prints fine with basic 0.20mm layers on a 0.40mm nozzle. All credit to the…
I can't take any real credit for this design. I only modified the “main-frame”, “top-plain”, and the “rack”. I love this design and just wanted something a little more smooth for a more comfortable experience.
The original Sherpa Crew and Sherpa Crew Redux use a bearing idler on the lower deck but I like the extra gear instead.
3 - 12V N20 (12mm) DC micro gear motor
Standard DC motor (130 Size) 1:4 geared extra material: 82A gear x4 2mm shaft 2mm x 12 screw x2 2mm x 4 screw x1
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
made it with petg 2 walls 5% infill nozzle 0.4mm width 0.20mm you cab doit better with 3 0r 4 walls infill10% bescause is a little bit heavy so be careful when you open th e riser
A mini geared box, originally designed for the World's Smallest M:TG game. To assembly place the cart on the flat surface. Place the lids in the open position and place the gears of the lids and cart together. Then drop the entire thing,…
A little snowman to bring home the holiday spirit. Geared, because why not. I used filament clippings for detailing. Insert Filament in the holes and cut flush for the eyes, mouth and buttons. Trim the nose and arms to the desired length.…
This is a locking vault box which uses a gear with locking lugs to secure the top to the base. Print one of each file (select either the “geared” or “plain” top, or modify to your liking.) This works straight off the printer and requires…
Another in the series of rotating gear toys. Now I have twisted the helix of the gear 4 times. The width of the spinner is 70mm and the height is 18mm. It is printed Print-in-place. Nozzle 0.4 mm, layer height 0.2 mm Many other spinners…
NOTICE: this is the first iteration of this design. It might work for you, it might not. If it doesn't, any feedback would be appreciate. Filament roller/guide for Creality Ender3 family of printers. Designed to work with DUAL GEARED…
Hi Everybody! This project comes as a remix of Incept 3D 's Leg prosthetic. Disclaimer: This prosthetic leg design is an experimental prototype and is provided as-is for educational and developmental purposes only. It is not certified,…
Geared Phone stand 2 I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things - a new gear pattern , a new more finely graduated locking mechanism , charging holes…
Držák mobilu se skládá ze základny holder_Base, do které se vlepuje přední plát s logem. Ten se tiskne spolu s druhým dílem v režimu MMU. Pro tento model jsem použil filament PLA od výrobce Filament PM. Pro variantu s logem FK Dukla Praha…
Just combined a couple of models to get the result i was looking for
Simple geared fidget keychain. Tolerances are tight but shouldn't be an issue. Prints fine from 10% to 500% Scale Print the following: 2 x Sides 2 x Gears 2 x Axles 2 x Clips 1 x Spacer
This motor mount is designed for the N20 Geared Micro Mini DC (3-6V) motor, which is available with a variety of geared output speeds. For your reference, I included a drawing I made from measuring a motor, together with a drawing…
This is the R4G extruder for Prusa printers, where the G stands for Greg or Geared. It's a DIY "Bondtech upgrade" that requires a very limited set of additional parts. It is derived from the Prusa R4 extruder of the MK3S (…
a geared phone stand for any phone with a tunnel underneath for charging
Have fun with two geared fidget rings! I uploaded many sizes (inner diameter in mm from 12mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value…
Have fun with two geared fidget rings! I uploaded many sizes (inner diameter in mm from 12mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value…
Update as of November 2020 Added aversion with upshifted 5mm boltmounts and flatbottom. This enables it to be mounted on the linear rail x-axis mod https://www.thingiverse.com/thing:3474395 with the drilltemplate…
Update as of September 29, 2018: New version uploaded. Now with rounded corners and Hexnut-holes for wrenchless mounting. This is a remix of the guidler from the geared Extruder. It enables you to mount the cheap filament runout sensors…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
Includes new boxes for both Pokémon and D&D. Made for 70mm card holder.
Built this as a fun challenge. Indexes off cutting edge, bar side, and adjacent tooth. Magnifies height of raker by about 14X. Indicator can be centered by screw adjustment. Metal at all potential wear points. Uses a drill bit for contact…
