Geared Phone stand 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geared Phone stand -2 version Size L and XL Print-in-place
- Rating
- 4.781 / 5
- Likes
- 1,586
- Downloads
- 10,762
- Makes
- 75
- Views
- 29,744
- Reviews
- 73
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Geared Phone stand 2
I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things -
a new gear pattern,
a new more finely graduated locking mechanism,
charging holes for a wider cable,
larger width - it is a little more robust,
I prepared two size versions - L and XL.
The L version is for landscape phones with a width of 70-75mm
The XL version is for landscape phones with a width of 76-80mm or even for small tablets.
This version is a complete print-in-place, the tolerances between the parts /0.35-0.4mm/ should be suitable for most printers.
I printed with a layer height of 0.2mm and a nozzle of 0.4mm.
The filament is Prusament PLA Prusa Pro Green - a very nice color
Do not use a brim when printing! The parts will then stick together and will not move!
Before printing, I recommend gently roughening the printing plate with a scotch-brite sponge + isopropyl
