Geared Phone stand 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geared Phone stand -2 version Size L and XL Print-in-place
- Ocena
- 4,781 / 5
- Polubienia
- 1586
- Pobrania
- 10 762
- Wydruki
- 75
- Wyświetlenia
- 29 744
- Oceny
- 73
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Geared Phone stand 2
I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things -
a new gear pattern,
a new more finely graduated locking mechanism,
charging holes for a wider cable,
larger width - it is a little more robust,
I prepared two size versions - L and XL.
The L version is for landscape phones with a width of 70-75mm
The XL version is for landscape phones with a width of 76-80mm or even for small tablets.
This version is a complete print-in-place, the tolerances between the parts /0.35-0.4mm/ should be suitable for most printers.
I printed with a layer height of 0.2mm and a nozzle of 0.4mm.
The filament is Prusament PLA Prusa Pro Green - a very nice color
Do not use a brim when printing! The parts will then stick together and will not move!
Before printing, I recommend gently roughening the printing plate with a scotch-brite sponge + isopropyl
