1 / 3
Sun/Rain/Dust Shield for Hikvision mini PTZ
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sun/Rain/Dust Shield for Hikvision mini PTZ (or PT)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 1
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sun/Rain/Dust Shield for Hikvision mini PTZ series
I've made this case in order to increase the protection of the camera against UV light, rain, dust and insects. In the same time, it allows the air to flow in order to cool down the radiator above.
The camera is well designed, but the exposed radiator above is something I do not understand… The radiator itself is a “magnet” for dust. Also, near the cable there is a gap (luft) which allows the water and insects to enter in the cable box.
Disclaimer:
- Use at your own risk.
- Tested on Hikvision DS-2DE3A400BW-DE/W(F1)(S5) 4 MP ColorVu Network PT Camera;
- It fits very tight and you may scratch the paint on the two pins if you force it; if it doesn't fit, you may rather polish a little bit the shield's fittings with a rotary tool;
- Use PETG or other filaments suitable for outdoor conditions/ high temperature;
- I personally use it in cold weather conditions; if you plan to use it in regions with high temperatures, you should keep an eye on the camera in order to avoid overheating.
- Observe the protection rating (IP66) from the camera datasheet.