P
PrintablesR1CDM
Hikvision DS-KABV6113-RS protective shield
Hikvision protective shield for KV6103/6113 series villa door station.
- Downloads
- 450
- Likes
- 35
- Rating
- 5
Search results: hikvision
85 models
P
PrintablesEvillNooB
Rack mount for Hikvision 7600 Series NVR with step file
The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…
- Downloads
- 363
- Likes
- 27
- Rating
- 5
P
Printablespoelstra
Hikvision DS-KV6113 doorbell bracket (45 degrees)
Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…
- Downloads
- 321
- Likes
- 18
- Rating
- 0
P
PrintablesPavel Boháč
Hikvision cam dome
Pro majitele HIKVision kamer, domeček pro montáž kamery na stěnu nebo do podbití, pokud vám kouká ze zdi/podbití už RJ45 koncovka.
- Downloads
- 260
- Likes
- 29
- Rating
- 0
P
PrintablesWakakaeheh
Hikvision NVR
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Layer Infill: 30% Filament brand: Generic Filament material: PLA
- Downloads
- 239
- Likes
- 20
- Rating
- 5
P
PrintablesGibonArt
Hikvision Dome Camera Junction Box
Needed to design a custom Junction Box for a Hikvision dome camera DS-2CD2145FWD-I(s). Came up with a simple design of a Junction box with a threaded inner side and a corresponding mounting plate for the camera with an outer thread.…
- Downloads
- 231
- Likes
- 28
- Rating
- 5
P
Printablesscenek
Hikvision Doorbell DK-KV8x13 Wall Mount
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
- Downloads
- 217
- Likes
- 13
- Rating
- 0
P
PrintablesArnixia
Hikvision camera angle junction box
Angle mount for Hikvision camera (DS-2CD2343) to roof beam (100mm base width). Camera outer diameter 127,3mm, 25° angle. Printed with 3 wall loops, 5% gyroid infill.
- Downloads
- 189
- Likes
- 17
- Rating
- 5
P
Printablesbmccarthy321
Hikvision Camera Mount version 2
I wanted something a bit more compact for my cameras at my property. The cat5 goes right through the back of this box in through the wall. There's three screw holes for recessing screw to anchor. I added 8-32 screw fittings to hold the…
- Downloads
- 187
- Likes
- 21
- Rating
- 0
P
Printablesslayernine
Hikvision Dome Mount 110mm hole spacing
I previously mounted my cameras directly to walls and posts and wanted to both clean up the wiring as well as get a better viewing angle that was not obstructed. As well, many of the existing designs have a flat top for easy printing but…
- Downloads
- 186
- Likes
- 25
- Rating
- 5
P
PrintablesHugo
Hikvision dome camera mount (DS-2CD2146)
DS-2CD2146 (diameter 121.4 mm) https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2146g2-i-su-/?q=ds-2cd2146g2-i&pageNum=1&position=1&hiksearch=true Other material: Camera mounting screws 3pcs…
- Downloads
- 186
- Likes
- 18
- Rating
- 0
P
PrintablesYazeedAlKhalaf
HikVision Wall Mount
I designed this two piece holder/mounter to mount my HikVision unit on the wall as you see in the pictures. Print Settings and Filament: It was an interesting journey, I printed it with ABS on my Ender 3 S1 Pro, and sliced it on Ultimaker…
- Downloads
- 174
- Likes
- 15
- Rating
- 0
P
PrintablesGibonArt
Hikvision JunctionBox Thread Reduction G 3/4 to PG 9
Thread reduction from G 3/4 to PG 9. Perfect fit for Hikvision IP camera junction boxes.
- Downloads
- 168
- Likes
- 8
- Rating
- 0
P
PrintablesRuffle
Hikvision Dome Camera mount
A mount for a Hikvision Dome camera with 111mm diameter base (several Hikvision cameras have this size base). I've included the Fusion360 CAD file so folk can alter it to suit. Category: Camera
- Downloads
- 140
- Likes
- 11
- Rating
- 5
P
Printablescaxaline
Desktop stand for Hikvision indoor station
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
- Downloads
- 136
- Likes
- 4
- Rating
- 0
P
PrintablesDmitry Eroshenko
Double-sided tape bracket for Hikvision Dome IP camera
This mount made for Hikvision DS-2CD2347G2-LSU/SL IP camera. But will work for other models with same dimensions. I wanted to connect the camera to tiles on the wall, but didn't want to make holes in the wall. I printed the model using…
- Downloads
- 122
- Likes
- 13
- Rating
- 0
P
PrintablesScott Paladin
Drive rail for Hikvision DS-9000 series security dvr
Whipped this up really quickly to mount some drives in second hand DVR my employer purchased. And it works. Not sure of all the models it'll fit and it's not perfect, but they don't pay OT on this stuff so “good enough to work” is all…
- Downloads
- 109
- Likes
- 5
- Rating
- 0
P
Printablesscenek
Hikvision Dome Camera Wall Mount
Wall mount for Hikvision camera DS-2CD2145F... You need 3 M5 brass heat insert nuts.
- Downloads
- 109
- Likes
- 10
- Rating
- 0
P
PrintablesChristophe-P
Protective Shield Hikvision DS-KV8113-WME1
à fixer avec 4 vis de M4 à tête fraisée il faut aussi 4 inserts de M3…
- Downloads
- 105
- Likes
- 15
- Rating
- 0
P
PrintablesNo Name
Hikvision camera wall mount (DS-1258ZJ)
Print as shown in the images, minimal tree supports required
- Downloads
- 103
- Likes
- 8
- Rating
- 0
P
Printablesdp studio
Waterproof cover for DC Connector of Hikvision cameras (mini PT series)
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament. *tested for HIKVISION DS-2DE3A400BW-DE-W(F1)(S5), but it should work…
- Downloads
- 103
- Likes
- 18
- Rating
- 5
P
PrintablesVafi
Hikvision DS-2DE2A404IW-DE3 dome ceiling mount
A ceiling mount for the HikVision DS-2DE2A404IW-DE3. Outer diameter is 133mm and outerheigth is 36mm. Print instructions Rafts: No Supports: Yes Resolution: 0,2 Infill: 15%
- Downloads
- 100
- Likes
- 6
- Rating
- 4
P
PrintablesToM Havel
Hikvision - Corner Camera Holder
Materiál PET-G-bílý, výplň 50 %, vrstva 0,33 mm, cca 11 hodin tisku, užití - rohová instalace.
- Downloads
- 97
- Likes
- 7
- Rating
- 0
P
PrintablesRB86
Hikvision 6320 6350 table holder/stand
Holder on the table for hikvision indoor unit 6320, 6350 maybe others
- Downloads
- 95
- Likes
- 3
- Rating
- 0
P
PrintablesRobertoooo
Hikvision Sunshade / Hood for DS-2CD2XXXXXX camera
I made this hood for Hikvision camera DS-2CD2T47G1-L with 6mm and 2.8mm focal lengths to prevent sunlight to burn into the picture when sun is rising, with camera looking to East. No supports needed. Use some UV-resistant material…
- Downloads
- 90
- Likes
- 27
- Rating
- 0
P
PrintablesHujairi
HIKVISION DS-KABV8113-RS Rain Shield
HikVision DS-KV8113 Villa Door Station Rain Shield. This is the surface version not the flush (to be mounted on the wall). Print Settings: 0.2mm Layers, 15% infill. 2 print files provided (PLA & PETG) Note: commercial use is not…
- Downloads
- 89
- Likes
- 5
- Rating
- 0
P
Printablesfast2s
Visor Hikvision Doorbell DS-KV9503
3d model from the original visor. The original is made of 1mm thick steel. This model has 4mm walls. 3d-модель снятая с оригинального козырька. Оригинал изготовлен из стали толщиной 1 мм. Стенки этой модели составляют 4 мм
- Downloads
- 86
- Likes
- 9
- Rating
- 0
P
PrintablesThatGuy
Hikvision Camera tabletop stand
I had a spare dome camera and wanted to use it as a 3D printer monitor. Unfortunately, I didn't have an easy way to aim it at the printer. This is a simple tabletop stand/mount that should fit any Hikvision dome camera model. The mounting…
- Downloads
- 80
- Likes
- 6
- Rating
- 0
P
PrintablesMartin Rejsek
Hikvision IP camera (DS-2CV2Q01FD-IW) wall mount bracket
Friend of mine lost this wall mount bracket for Hikvision IP camera (DS-2CV2Q01FD-IW). My first model in Tinkercad.
- Downloads
- 76
- Likes
- 6
- Rating
- 0
P
Printablessstopar_CZ
Desk holder for indoor station Hikvision
Stable table holder for the Hikvision video display station display. Easy installation metal bracket for 3 screws 3.0-3.2x10-15 mm. Printing PETG ABAFLEX.cz on Bambulab A1. No supports. Cable outlet from the back of the stand.
- Downloads
- 73
- Likes
- 7
- Rating
- 0
P
PrintablesAnrabbarna
Hikvision NVR Rack mount
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
- Downloads
- 72
- Likes
- 7
- Rating
- 0
P
Printablesonus
T10 Torx Handle -- for HikVision
Had to install a few Hik Vision cams… found out in short order… the L driver is rubbish… so we came up with a solution. cut the L short and epoxy it into the 3d printed handle. Much easier to utilize :D :D :D Enjoy!
- Downloads
- 71
- Likes
- 10
- Rating
- 0
P
PrintablesDarkusas
Hikvision kamera 40° angle mount
I printed without supports, but I think I would use supports next time. Filament: Prusament ASA.
- Downloads
- 66
- Likes
- 11
- Rating
- 0
P
Printablespotbellytron
Hikvision Junction Box to Ubiquiti G6 Turret Adapter
This adapter is designed for larger Hikvision camera junction boxes, specifically this one from Kenuco for the DS-2CD23x2 cameras. It allows easily switching to a Ubiquiti G6 turret (or compatible device). Requires 4x M3 heat inserts .…
- Downloads
- 63
- Likes
- 4
- Rating
- 0
P
Printablesslayernine
Hikvision PTZ dome mounting box
Why pay for the overpriced mount for the camera when you can print one! Anyway, this remix fixes the overhang on the original model. Uses a bit more filament but it also provides better support to 4 of the six screw hole pegs.
- Downloads
- 63
- Likes
- 18
- Rating
- 0
P
PrintablesSebastian
HiLook / Hikvision camera mount
Designed for HiLook/Hikvision cameras with 120mm base, e.g. PTZ-C4MP or any other with the mount plate as on the picture below. The mount has a hole for Ethernet cable and is mounted to the camera with 4 screws. Provided STL has no holes…
- Downloads
- 62
- Likes
- 4
- Rating
- 0
P
PrintablesPedroKV
Hikvision DS-2CD2132F-I base (111mm)
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
- Downloads
- 59
- Likes
- 5
- Rating
- 0
P
PrintablesArnixia
Hikvision camera slim junction box
Slim mount for Hikvision camera (DS-2CD2346) to wall. Camera outer diameter 138,3mm. Printed with 3 wall loops, 8% rectilinear infill, 2mm top and bottom shell thicknes.
- Downloads
- 58
- Likes
- 2
- Rating
- 0
P
PrintablesOndřej Paluska
Hikvision Junction box hole plug
This is hole plug for Hikvision cameras junction box like DS-1280ZJ. You can use it to close openings on your junction box. You can print it without supports, better to use 4 wall loops and 40 - 60% infill. I recommend printing from PETG.…
- Downloads
- 54
- Likes
- 10
- Rating
- 0
P
PrintablesItsThatGuy
Hikvision DS-2CD2385G1-I mount
I got some new cameras that were noticeably bigger than my older ones. A mount cost around $40 and I just got vacation, so instead of buying one and waiting for it, I created one. NOTE: There are no screw-holes, I used my soldering iron…
- Downloads
- 51
- Likes
- 7
- Rating
- 0
P
PrintablesSot Kon
HIKVISION DOME CAMERA BASE
Easy print in place HIKVISION DOME CAMERA BASE Settings: 0.3 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
Printablesjbogush
Hikvision Turret Camera to 4" Square Junction Box Adapter
This model is an adapter to mount a larger format Hikvision turret camera to the cover of a common outdoor 4" junction box. The plastic outdoor 4" boxes are commonly used for a variety of CCTV cameras, often mounted directly to the box.…
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
Printablesdp studio
Waterproof cover for DC Connector of Hikvision cameras
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament.
- Downloads
- 50
- Likes
- 14
- Rating
- 0
P
PrintablesWhiteSpirrite
HikVision DS-2CD2543G0-IWS
Support HikVision DS-2CD2543G0-IWS
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
PrintablesAntonio
Junction box for Hikvision DS-2CD63C5G1-IVS cam
UPDATE: added stl file as required It was nearly impossible tu buy a junction box for my Hikvision cam, out of stock or not available, so I modelled one to be similar to his original one DS-2280ZJ-WA140. Printed in petg, 25% infill,…
- Downloads
- 49
- Likes
- 6
- Rating
- 0
P
PrintablesNeron's Lab
Hikvision junction box to Unifi G6 dome mount adapter plate
Do you need to replace Hikvision dome security cameras with new Unifi G6s, or just want to use a cheaper junction box? Then this model is for you! No supports needed 4x M3x5x4 (“Voron” style) inserts Printed with 3 Walls and 15% gyroid…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
Printablesjes
Hikvision DS-2CD1321 Camera Mount
Camera Junction Box for Hikvision DS-2CD1321 This is a junction box intended for the Hikvision DS-2CD1321 dome security camera. It provides a cable-management solution and a stable mounting platform for walls or ceilings. Also perfect…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
Printablesbmccarthy321
Hikvision Camera Mount
We've had a few issues around the house with cars driving through the back fence, people opening the car doors and stealing change, and some knuckleheads shooting guns off on our quiet, normally peaceful little street. As such, I had a…
- Downloads
- 46
- Likes
- 5
- Rating
- 0
P
PrintablesMarek
HikVision DS-U12 Holder for 2020 profile
Print 2Pcs (mirror one part) 4Pcs M3x10 screw 2x T rock nut
- Downloads
- 45
- Likes
- 6
- Rating
- 0
P
PrintablesMitch
Hikvision DS-6003-WIP doorbell mount
When I got the doorbell and I mounted it, the wall was very visible. This is something I didn't want so I made a easy mounting plate. A little gap is there for the cable of the doorbell itself.
- Downloads
- 43
- Likes
- 6
- Rating
- 0
P
PrintablesTomáš Spál
Roof for Hikvision Camera
Canopy for Hikvision DS-1258ZJ WM110 camera holder. Protect the camera from rain and keep it clean to prevent poor view
- Downloads
- 42
- Likes
- 9
- Rating
- 0
P
Printablesdp studio
Screw Cap for Hikvision Outdoor Bullet Cameras
The main goal is to protect the rubber gasket (used for the screw head) against UV light, water and dust. Also, it's a basic anti-theft measure (see v2). Please be aware that it fits very thigh and would be very challenging to take it out…
- Downloads
- 36
- Likes
- 6
- Rating
- 0
P
PrintablesItsThatGuy
Hikvision camera mount (DS-1258ZJ) adapter for DS-2CD1383G2-LIU
I wanted to replace 2 of my old DS-2CD2142 cameras with DS-2CD1383G2-LIU, but wanted to reuse the existing mounts. The new cameras are smaller than the old, so I created an adapter. The 3 holes for nuts in the top are a tight fit, which…
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
PrintablesGibonArt
Hikvision camera BambuLab door adapter/mount
I had a Hikvision DS-2CD2423G0-I laying around and I thought to use it as a live additional cam looking through the BambuLab door in. It allows to view the model from different angle and also observe the internal parts of printer such as…
- Downloads
- 33
- Likes
- 6
- Rating
- 0
P
Printablesdp studio
Sun/Rain/Dust Shield for Hikvision mini PTZ
Sun/Rain/Dust Shield for Hikvision mini PTZ series I've made this case in order to increase the protection of the camera against UV light, rain, dust and insects. In the same time, it allows the air to flow in order to cool down the…
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesDmitry Eroshenko
Double-sided tape bracket for Hikvision DS-2CD1047G2
This mount made for Hikvision DS-2CD1047G2 IP camera. But will work for other models with same dimensions. I wanted to connect the camera to tiles on the wall, but didn't want to make holes in the wall. I didn't use original screws…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesThomas Kiss
Hikvision Panel+HDD holder
This is a simple panel designed to hold a HDD on one side and a Hikvision video recorder on the other. This can be helpful if you have no room to install the NVR in its original box. For example if you need to install the surveillance…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesMakeseum
HikVision DS-K1T320MFWX Angled Wall Mount
The HikVision DS-K1T320MFWX facial recognition terminal is the target of this 3D printable wall mount. Its 15-degree angle allows cables to be neatly hidden behind the device while yet giving it the ideal tilt. This mount is perfect for…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesRomankos Tyshchenko
Hikvision DS-KV61.. protective shield
Better to use black PETG or something else which is not afraid of the Sun. Add a fuzzy skin for the outer walls for better look. (Included in 3mf file)
- Downloads
- 22
- Likes
- 7
- Rating
- 0
P
Printablesbloodpack
Hikvision HWI-D120HA Camera Mount
Camera mount for Hikvision HWI-D150HA with and without raincover STEP Files included Required Hardware for Mounting: 3 x M3 Heat Inserts 2 x M8 Screws for wall mounting Print & Material Settings: No Supports needed Material: ABS or ABS+…
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
PrintablesAlex S
hikvision кріпленя
кріплення для hikvision камери кому треба
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
Printablestimvdhoorn
Hikvision camera box
I present you my self-designed Hikvision dome camera box. I wanted a way to place my Hikvision camera behind the glass. My camera is the Hikvision DS-2CD2347G2-LU, but I think it will fit other camera's aswell! I printed in 0.3mm…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
Printablesmafikes
Hikvision DS-2CD2183G2 Corner Wall Mount Bracket
Wall mount corner bracket for HIK VISION Camera DS-2CD2183G2-IS, but will probably fit other models too. Check holes before use. I installed heat-set threaded inserts in the holes. Print Settings : I printed it with ASA material for its…
- Downloads
- 21
- Likes
- 4
- Rating
- 0
P
Printableswaschbaerbauch75
Modular Hikvision bullet cam stand
This is a modular Hikvision bullet cam stand.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesRazvan Constantin
Hikvision dome camera false ceiling mount
Perfect for security installations where cameras need to be mounted flush with suspended ceiling tiles. The plate acts as a structural bridge, allowing the camera to clamp the ceiling material between the printed mount and camera base.…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablescrsleeth
Hikvision DS-2DE2A404IW-DE3 PTZ washer
Hikvision DS-2DE2A404IW-DE3 IP cameras have a small plastic washer that keeps the 'ball mount' part of the camera lens held against the camera's base. This part is prone to breaking. I had two cameras have this part break in shipping. I…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablestt
Hikvision cube DS-2CD2412 / DS-2CD2432 camera holder mount for ender 3 v3 KE
Camera holder for directly mounting a Hikvision cube camera to your creality ender 3 v3 ke or similar. With the Hikvision camera you can monitor your prints easily, and what is also a very nice feature is that these camera's can make…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesTinec
Holder for HiLook by Hikvision IPC-T240HA-LUF/SL 2.8mm
3x threaded insert M3 https://www.3dfoxshop.cz/zavitova-vlozka-10-ks/?variantId=16740
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesRadek Hvizdoš
Hikvision JunctionBox Adapter G 3/4" to PG 16
Similar to Hikvision JunctionBox Thread Reduction G 3/4 to PG 9 and PG 13,5 to 3/4" Thread Adapter projects, but I needed the adapter for PG16 glands, so that my Ethernet jacks could pass easily through.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesNGX Scripting
Hikvision DS-K1T342DWX Camera Cover
A hinged camera cover for the Hikvision facial recognition camera model DS-K1T342DWX. Created because one of our cameras is pointed straight at one of our technician's desk, and no one likes being watched like that. This cover, though not…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesgmls
Hikvision doorbell DS-KV6113 30° wall mount
Corner bracket for mounting a Hikvision DS-KV6113 on the left of the door! bracket is not reversible Mounting holes are spaced 10cm I have made this because the original hikvision was out of stock, the original is also 30° and is perfect…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesStillMaker
Hikvision camera stand
Lifts a Hikvision DS-2CD2432F-IW camera. Lifts the camera about 120mm and tilts it forward. You an put rocks of some other weight in it so it doesn't tip over. Will fit any base that is 72mm wide and 9mm tall.
- Downloads
- 6
- Likes
- 5
- Rating
- 0
P
PrintablesM S
HIKvision nvr fan mod
My hikvision was too loud, so I added a noctua fan. Still too loud. Added a fan controller with a temperature sensor, still to loud. Placing the fan closer to the cpu and using the fan controller? cool & quiet. You need 2x m2.5 and…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesfast2s
raspberry pi 5 holder. For hikvision
Raspberry Pi 5 Holder. For hikvision outdoor enclosure
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesDawid Brüning
macro lens holder for Hikvision DS-2TP31
Two models are available: for lenses of the diameter 18 mm and 20 mm. Just glue the lens in. The lens-holder can be clipped into the front mount of the thermal camera. Recommended Lenses: ZnSe CVD. Focal length: 100 mm for small…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printables
Roof for Hikvision Camera
Canopy for Hikvision DS-1258ZJ WM110 camera holder. Protect the camera from rain and keep it clean to prevent poor view
P
Printables
Hikvision NVR Rack mount
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
P
Printables
Desktop stand for Hikvision indoor station
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
P
Printables
Hikvision DS-K1T342DWX Camera Cover
A hinged camera cover for the Hikvision facial recognition camera model DS-K1T342DWX. Created because one of our cameras is pointed straight at one of our technician's desk, and no one likes being watched like that. This cover, though not…
P
Printables
Hikvision HWI-D120HA Camera Mount
Camera mount for Hikvision HWI-D150HA with and without raincover STEP Files included Required Hardware for Mounting: 3 x M3 Heat Inserts 2 x M8 Screws for wall mounting Print & Material Settings: No Supports needed Material: ABS or ABS+…
P
PrintablesChrisE
Hikvision Videocamera Support for 360 Dome Camera
Junction Box and Wall / Cieling Mount compatible with Hikvision Panoramic Fisheye CCTV Cameras with Triangular Footprint Alternative to Hikvision Model No. DS-1280ZJ-DM25 / M1. with seal Included. Two variants included - with STEP Format…
- Likes
- 1
- Rating
- 0
P
Printables
HIKVISION MOUNT + RAIN COVER
Replacement wall mounts for HIKVISION outdoor cameras, and additional sun/water shields against product aging, made of ASA for sun protection, excellent financial savings for household products