Junction box for Hikvision DS-2CD63C5G1-IVS cam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
juncion box for Hikvision cam
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
UPDATE: added stl file as required
It was nearly impossible tu buy a junction box for my Hikvision cam, out of stock or not available, so I modelled one to be similar to his original one DS-2280ZJ-WA140.
Printed in petg, 25% infill, support only from plate and sprayed in white cause I got only grey bobine :)
you will need to drill the 4 holes in the metal plate supplied because they are smaller than the screws I used, if you don't want to enlarge them you can modify the 4 high slots for the screws in fusion 360
there is also 3 holes for wall mount in the base
print the junction box, apply the metallic plate with the 4 screw then apply the camera
enjoy