Tapo C100 BR Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for the Tapo C100 Brazilian version.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
---- English ---
Created this enclosure for the tapo C100 BR (brazilian version). You will have to remove the long mouting arm (Its has a rubber on top of it and is fixed with a screw).
You have to use 4x 3mm heated inserts and 4x 3mm x 6mm allen screws.
The cable is really tricky to get in, but if you use a plier carefully it will connect (please be carefull with the cable).
I printed everything with PETG using a 0.6mm nozzle. The camera should be a tight fit.
Feel free to modify according to your needs.
I don't know if it works with tapo C100 from other countries.
---- Portuguese ---
Criei este cover para a Tapo C100 BR. Você precisará remover o braço de montagem (ele tem uma borracha na parte superior e é fixado com um parafuso).
Para a fixação, utilize 4 heated inserts de 3mm e 4 parafusos Allen de 3mm x 6mm.
A passagem do cabo é um pouco difícil, mas, com o auxílio de um alicate e muito cuidado, é possível conectá-lo (pelo amor de deus tenha cuidado para n danificar o cabo).
Impresso utilizando PETG e um nozzle de 0.6mm. A camera entra com pouqissima folga. A tampa tem uma folga nas laterias.