Square Golf Launch Monitor Enclosure V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V2 of Square Golf Launch Monitor Protection Enclosure
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 351
- Makes
- 2
- Views
- 1,519
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Redesigned with USB port access, looser fitting Polycarbonate slot, larger ventilation holes.
The main body STL should be printed in PETG or better. I recommend 50% or more infill with Cubic pattern. The slot of Polycarbonate is designed for .093" or 2.36mm thick Poly. I DO NOT recommend Acrylic as it's very weak compared to Poly.
Lid I recommend in PETG but since it doesn't need as much abuse protection, you can probably back off on the amount of infill.
I've included a template for cutting your Polycarbonate to the proper size.
The turf base, or I call it a receiver, is to cut into turf areas 1" in thickness. The main body sits inside the receiver so it's in the exact same position every time. In our simulator, there is one for right handed and left handed golfers.
