1 / 6
Milescraft 1318 Drillmate Chuck Key Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A chuck key holder with a magnet for the Milescraft 1318 DrillMate.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 55
- Makes
- 1
- Views
- 237
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A chuck key holder with a magnet for the Milescraft 1318 DrillMate. The magnet holds the key securely, even when upside down.
What you will need:
- A 5x5mm cylindrical magnet (5mm height and 5mm diameter)
- CA glue (super glue)
Printing:
- 0.4mm nozzle
- 0.2mm layers
- 3 perimeters
- no supports
- PETG recommended
Installation:
- Insert the magnet from the bottom. The hole is tight, so you will need to apply some force.
- Using CA glue (super glue), attach the key holder to the DrillMate as shown in the pictures.
Others:
- stl and step files available