Counting matching models…
Although there are many right angle guides for common (and more expensive!) track saw tracks (like Festool, Makita, Wen, Powertec, etc.), I wanted a right angle guide for the more inexpensive Milescraft track saw track and didn't see any…
Pretty self-explanatory. Print one base and one nut in the default STL orientations (flat for the nut and on the side for the base). This will give the best strength and will require no supports. Assemble base to nut with one M6 x 20mm…
You will need the additional parts from the original design from JohnMartin at https://www.printables.com/model/425364-parallel-guides-fits-makitafestoolwen-track-saw-gu
Designed to hold four Milescraft Tri-Grips, this holder is perfect for letting you grab the TriGrips off the wall and set it on your workbench, as it's self-supporting even when empty. Do you have Rockler's Bench Cookies as well? Check…
Logos for Crescent Tools, Microjig, Incremental Tools (Incra), and Milescraft If you're looking for a particular that I haven't already done, let me know and I'll get it for you.
There are similar commercial products for the DCW600, but I wasn't able to find one that was compatible with Milescraft track saw track. The design is loosely based on the original base plate that came with the tool. I printed mine using…
There is some play on the topside, as the rails are different depths on each side, but still works well for a wall mount. Not snug enough for a garage door.
This is a guide plate to attach to the Milescraft Drill Guide so you can evenly space your holes. Category: Tools
As shown in the pics, one of the bushings for the Milescraft base plate had failed so I set out to make a replacement. Recreated it to my liking, cut a piece of ¼" tubing which was press fit in with a little heat. Printed in ABS w/ 99…
A chuck key holder with a magnet for the Milescraft 1318 DrillMate. The magnet holds the key securely, even when upside down. What you will need: A 5x5mm cylindrical magnet (5mm height and 5mm diameter) CA glue (super glue) Printing:…
I recently bought a Milescraft 1318 DrillMate Portable Drill Guide to help in drilling holes perpendicular to some of my projects. It's a nice little tool, but I was quickly frustrated that there was no obvious place to store the chuck…
Not much has changed from the @CurlyFriesALPHA original, except for the orientation of the angle and the second t-slot. Files: an editable .step file, a .3mf file for Bambu Studio, and a .stl file in case you like that better. Print…
I already had the simple model, and paying almost $200's for similar jigs seemed crazy to me. I plan on making some top pieces to fit the dovetail slot for extra stability when the tool is extended. The black squares I also already had,…
Milescraft 3406 Heel Replacement
Screw mounted holder to hold Milescraft triangular bench cookies.
This is a remix of a track mounting system that was originally designed for the Kreg Accu-Cut system. I modified the size of the holder to fix the tracks for my Milescraft tracks. The holders hold the tracks well, even with the door fully…
Needed a storage unit for my 6 TriGrips. Designed to attach to pegboard, a french cleat or any solid surface.
This is a Gridfinity holder for the Milescraft 7336 PocketJig 200XCJ pocket hole kit. Doesn't hold the clamp or any of the consumables, but keeps the kit and bits together and organized. In my photo is my first print which was not quite…
I acquired MilesCraft ToolStand and decided to turn it into a heat-set insert press. I purchased a cheap soldering iron and heat-set install tips from Amazon and got to work. I and existing model on thingiverse they replaced the head of…
Holder for Milecraft TriGrip bench cookies that can go into a 3/4-inch or 19mm dog hole to keep them from sliding around on the workbench
I was looking for an easy way to set the depth on a Milescraft Drillmate; the tool that lets you turn your drill into a drill press. The clamp takes a 5mm heat set insert and a knob for a 5mm hex-headed bolt. First set the shaft clamp…
This is only the smaller pad for the Milescraft clamp. I printed the “ Lower Plate Pad” from the https://www.printables.com/model/375062-tpuflexible-kreg-automaxx-clamp-pads and it fits well.
while using a milescraft joint master (SKU: 1334/1384), i was working with adding dowels to a hardwood project (1x2 boards specifically). I found it useful to have some specific spacing offsets, from the flat red endstops, to help land my…
The model is made specifically for Milescraft Universal Saw guide, and the sizing is intentionally pretty tight. Though the model is parameterized, so it is easy to adjust to other models. I printed in ABS, but it won't be easy without a…
A simple pegboard mount for a simple jig. Doesn't require any supports to print. has an enlarged hole in the bottom to accommodate the pencil. The pegs print separately and are simply glued in the slot with your favorite adhesive. I used…
I bought this saw guide from a bargain bin table for a few dollars. It was missing some parts and replacements from Milescraft was cheap enough but 10 to 12 dollars to ship made it not worth it. I had nothing to measure. All items were…
I tested and included all the sizes that they provided and they are a great fix and size match! All in inches, just as is the tool, so maybe a little math, but I made the stops at 1/16" increments so hopefully not too much math. If you…
Simple hanger for Milescraft TriGrips pads. Put two screws (template included), hang the hanger, put TriGrips on top. Voila! :) My print settings: PETG 0.24mm layer 3 walls 15% gyroid infill supports: enabled
A gridfinity holder for the Milescraft HookDriver and an additional hookdriver bit I have.
Simple holder for Milescraft Cabinetmate. Size of pins is adjusted to fit into holes of Cabinetmate AND get down a bit. It holdes a tool and protect against slipping off the holder. And yes, on photo there is mistake in holder…
This is a replacement TPU pad for the Milescraft GrabberPRO Push Block. It is ½" wide, but you can adjust it in the slicer for other sizes. The original pad uses super strong adhesive, and it's difficult to remove. I carefully cut off my…
I bought this saw guide from a bargain bin table for a few dollars. It was missing some parts and replacements from Milescraft was cheap enough but 10 to 12 dollars to ship made it not worth it. I had nothing to measure. All items were…
Needed a storage unit for my 6 TriGrips. Designed to attach to pegboard, a french cleat or any solid surface.
A gridfinity holder for the Milescraft HookDriver and an additional hookdriver bit I have.
