Milescraft 1403 Saw Guide Replacement Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three replacement parts for the saw guide
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I bought this saw guide from a bargain bin table for a few dollars. It was missing some parts and replacements from Milescraft was cheap enough but 10 to 12 dollars to ship made it not worth it. I had nothing to measure. All items were made from sight from pictures.
Knobs: Easy enough. Use 3 for 4 walls, 020 layer, 25 to 35% infill, add support for hex holes. Glue in 6mm nut.
Saw Clamps: Still Easy. Use 4 for 5 walls, 020 layer, 50% infill. Use 5mm screws. Tight thread fit. I did not want to make them loose and more prone to strip out. I used a cut off piece of hex wrench in a drill to run the screw in and out several times until it loosened. I added a film of lithium grease to the threads.
Guide Cover: Two-to-three-hour print Use 3 walls, 020 layer, 25% infill, add support for holes. Use two 5mm screws for mounting.
PLA filament used was SuperFila Wine Red and Anycubic Silver Silk purchased from Amazon.