1 / 5
Small Clip - Bag Clip/Kitchen Clip/Grip/Peg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully printable Clip with PETG Spring, simple and printable in less than an hour! Part of a series.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 87
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a smaller version of my simple clip that utilises a printable spring to hold both parts closed.
Printing Notes
- This is best printed in PETG as the spring needs to be deformed and held under tension, I think PLA would break.
- The Clip - print at 100% in-fill, side-on - this way the layer lines provide strength.
- The Sides - print flat-side down, they're universal, print 2 of them - I printed in Prusaslicer with adaptive layers on, Quality/Speed 0.62, with smooth radius set to 5 and they came out well.
Assembly
- Line the 2 sides up together, using the locating pins on the pivot.
- Grab the clip and slide down from the rear over the middle section until the clip snaps into it's locating slot - this WILL take some considerable force - but it's necessary to ensure there's some decent grip from the clip.