Bemis Jamestown toilet seat ~9-inch bolt pattern hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a hinge to fit a Bemis Jamestown (round) toilet seat to a ~9-inch bolt pattern toilet
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
I've got a 1939 toilet with a weird ~9-inch bolt pattern spacing that I couldn't find a toilet seat that it fits, but the Bemis Jamestown Round seat (Model # 530SLOW 000, Home Depot SKU 1001262683) otherwise fits and has an easily disassembled hinge (4 Phillips head screws), so I 3D printed a replacement hinge to fit the toilet's holes.
I printed this in PLA on a Prusa Mini+ set to 0.15mm STRUCTURAL with Snug supports (Everywhere), 15% Gyroid infill, and 4 perimeters. Print time was ~3hours. Note the orientation of the print in my Prusa Slicer screenshot - you want the keyed hole for the slow-close mechanism to be the most accurate. Depending on your printer and existing hinge, you may need to widen that keyed hole a bit (one side was perfect for me, the other I had to use a clamp to force it in).
Also note: the file only includes 1 side, you'll need to mirror it in your slicer for both sides.