1 / 1
Bolt for the  filament cutter 45° (instead of M3x25 screw) — image 1

Bolt for the filament cutter 45° (instead of M3x25 screw)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This should make it possible to assemble the filament cutter without two M3x25mm screws

Rating
5 / 5
Likes
27
Downloads
220
Makes
1
Views
1,256
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This saves you a trip to a hardware store and few cents on the M3x25 screw ;) 

I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest store… so I've printed two of those bolts, sanded them a bit and then with a little bit of force I've managed to assemble the cutter without any screws. 

Printed on the side with supports, PLA, 0.15mm layer height. Required a bit of sanding to fit the top part of the cutter.

Source file for Fusion 360 is included, but generally the design is extremely simple - the bolt's diameter is 2.6mm and the head's diameter is 4.8mm