pipe corner join for printer enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
using this corner join, you can use 1.5mm conduit pipes and some PVC sheets to make a soft case cover for anything.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
i worked this out as a beginner project on FreeCAD. you can use 1.5mm conduit pipes and some PVC sheets to make a soft tent enclosure to cover up your 3d printer. although L-bends & T joins are easily available in the market, a corner bend join is not that common. i hope this comes in handy to someone looking for a cheap alternative case for their printers or someone looking to make a tent playhouse for kids. print 8 for a box structure and cut out 12 pieces of 1.5mm conduit pipe after measuring endto end x,y movements (especially for bedslingers, you gotta factor in the extended bed movements for the y-pipe measurements). if you need a corner join for a pipe with different diameter, i have attached my project files along with the stI. you can edit the sketch dimensions accordingly