90mm fan quick release
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
quick release tiwst lock style for 90mm fans, made for with the SV08 HEPA+Carbon filtration in mind.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 10
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was annoyed but the design of the sv08 hepa+ filter, to take it off you have to take the whole thing apart to remove the 4 screws that bind the filter to the printer.
It takes 10 screws and the removal of the carbon pellets and the hepa filter.
At first i made a threaded adapter, but after thinking for a quick second of thinking I made this one right after, for even easier use.
with these adapter plates all you need to do is twist it off by 45 degrees and it is done, no unscrewing pesky screws and taking apart anything.
BOM:
4 M4x4x6 threaded inserts for the female plate
and 4 M4X6 BHSC screws for the male plate
You can reuse the screws that came with the enclosure to screw on the filter, maybe use 1 or 2 washers if they are too long.
you may need to widen the negative parts for the screw heads and threaded inserts, depending on how big the hardware is you are using.