1 / 4
North American XF-108 Rapier — image 1
1 / 4

North American XF-108 Rapier

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

North American XF-108 Rapier, Scale 1:200

Rating
0 / 5
Likes
2
Downloads
48
Makes
0
Views
239
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The North American XF-108 Rapier was a proposed long-range, high-speed interceptor aircraft designed by North American Aviation. It was developed alongside the XB-70 Valkyrie supersonic bomber, but no flying prototype was ever realized.

This printable model I created is just a very rough model, specifically designed for easy 3d-printing. Because my printer sadly wasn't able to print the full model with easy to removable support structures, I printed it in two parts, and had to glue it together.

Dimensions:
-length: 135mm
-wing span: 90mm
-height (assembled): mm

Scale: 1:200

The STL files are scale 1:200, the stand is a downsized version of the stand of my XB-70 to sorrt of symbolize that these two planes belong together.

 

Print Settings

Printer:
Anycubic i3 Mega

Resolution:
0.08mm
0.16mm (first layer)

Infill: 
25%

Filament:
Anycubic PETG  white / black

Notes: 
The afterburners and the stand were printed with black Anycubic PETG with a resulution of 0.1 mm.
The main hull/fuselage was printed with white Anycubic PETG with a resulution of 0.08 mm.

 

Post-Printing

Glue Everything Together:
Usually you can glue all the parts immediately together, without a lot of reworking. I recommed using superglue or instant glue.

The stand has to be glued in the center of gravity. To find the center of gravity, simply balance the fully assembled plane on the tip of your finger.

Tags