North American XF-108 Rapier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
North American XF-108 Rapier, Scale 1:200
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
The North American XF-108 Rapier was a proposed long-range, high-speed interceptor aircraft designed by North American Aviation. It was developed alongside the XB-70 Valkyrie supersonic bomber, but no flying prototype was ever realized.
This printable model I created is just a very rough model, specifically designed for easy 3d-printing. Because my printer sadly wasn't able to print the full model with easy to removable support structures, I printed it in two parts, and had to glue it together.
Dimensions:
-length: 135mm
-wing span: 90mm
-height (assembled): mm
Scale: 1:200
The STL files are scale 1:200, the stand is a downsized version of the stand of my XB-70 to sorrt of symbolize that these two planes belong together.
Print Settings
Printer:
Anycubic i3 Mega
Resolution:
0.08mm
0.16mm (first layer)
Infill:
25%
Filament:
Anycubic PETG white / black
Notes:
The afterburners and the stand were printed with black Anycubic PETG with a resulution of 0.1 mm.
The main hull/fuselage was printed with white Anycubic PETG with a resulution of 0.08 mm.
Post-Printing
Glue Everything Together:
Usually you can glue all the parts immediately together, without a lot of reworking. I recommed using superglue or instant glue.
The stand has to be glued in the center of gravity. To find the center of gravity, simply balance the fully assembled plane on the tip of your finger.