463 modeli
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
Wydruk około 8,04 €–9,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a large knob for a 6.5mm diameter D-shaft rotary switch on a Wexford CT-001HF Heater. It was missing its original knob, so rather than send to E-waste, I designed a knob for it. It likely can be used for other applications.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support de terminal de paiement SumUp Solo à insérer dans un panier de collecte en osier.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tidewater 232 LXF 2022 Center Console Boat Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
ClipCharge – RemixForge Edition Load Fast. Clip On. Move Out. ClipCharge turns a trusted 9mm speed loader design into a battle-ready EDC essential. This RemixForge edition adds a rear-mounted hook for keyrings, carabiners, or MOLLE loops,…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Every once in a while, the 3D printer saves the day. The XF80mm macro lens is one of my favorite lenses for the Fuji APS-C cameras, but mine was sadly crippled one day when the stock lens hood fell off, rolled into the street, and was…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple custom fan shroud for XFX Merc Series graphics cards of the RX7000 series. Low profile, accepts any 120mm fan using M3 hardware. Uses M3 threaded inserts (d=~4,2mm, L<7mm). Includes optional flexible exhaust duct (soft TPU).…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Here you will find the most famous logos in the world! 116 logos for now! I regularly add new ones. If you want one in particular you can tell me in comment. I will do my best to help you! I will add the most famous brands only :) I also…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Customizable action base / stand for mecha with a built-in locking pin for easy rotation and locking of the stand. PDF assembly instructions included in the .zip file. See it in action! IMPORTANT If you're using Prusa Slicer or Bambu…
Meet Toolboxfinity — where Gridfinity meets garage toughness . These stackable, toolbox-style drawers lock together for unlimited height and unbeatable durability. With deep storage bins that stay put when you move or bump your setup,…
You will find here more logos : https://www.printables.com/fr/model/960895-worlds-most-famous-logo-dxf/files
For more logos : +100 World famous logos (+DXF) par Referentiel | Téléchargez gratuitement un modèle STL | Printables.com
This is a simple .dxf hexagon pattern you can use this to create hex pattern cutouts etc in your cad models.
Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.
Logo from movies : Spider-Man (2002) Spider-Man 2 (2004) Spider-Man 3 (2007) The Amazing Spider-Man (2012) The Amazing Spider-Man 2 (2014) Captain America : Civil War (2016) Spider-Man Homecoming (2017) Spider-Man : Into the Spider-Verse…
This is a simple electrical engineering schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I…
Elevate your Lenovo M90q or P340 setup with this expertly designed custom 3D-printed bracket tailored for the XFX RX6400 GPU. This bracket ensures a perfect fit and robust durability, allowing for seamless installation of your GPU without…
Simple SFP beer case multiple varient available : SFP : 5x5 10x10 XFP/QSFP: 5x5 10x10 Copper SFP (more tick on top) : 5x5 10x10 QSFP DD (due to heatsink) : 5x5 10x50 more varient could be added as request. This project is freely inspired…
The XF-11 experimental reconnaissance aircraft has to be one of my favourite looking aircraft of all time. Designed by Howard Hughes in the 1940's, it was fitted with 2 sets of contra-rotating props and controllable-pitch propellers. On…
Material: 4pcs countersunk head screw M3x6 4pcs M3 thread insert Model: https://cad.onshape.com/documents/0d407fe5de31bdb0b7bc3c3a/w/b262644aaedd913f842146de/e/04ab4ae53c01857c155ed3c5
LEICA style lens hood for fujifilm XF23 f2
Remix of my previous submitted Xfinity XB7 Gateway Router for the new XB8. A left and right side model is included.
Model of the Rumble Fruit from Roblox Bloxfruits Printable with tree supports (build plate only) for lower part. The top section doesn't need supports - mine printed OK with the bridging (see the gcode).
Update 27Dec2022-All files have been updated; more Detail for both spring and elastic versions. Spring version clearances updated. Both require one 7/8" 4-40 screw or similar. Spring release requires one 3/8" 4-40 screw. Update…
This is a simple Arduino Uno R3 schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I have…
In case i forgot something please message me. If you need any other files besides dxf and stl just text me Original: https://github.com/tbs-trappy/source_one
Here you will find the most famous logos in cinema! +30 logos for now! I regularly add new ones. I also make available the DXF files of the logos. I know how useful it can be for your designs ;)…
cleaned up the files to be used on cnc-mill ore cnc-cutter
I realised that people like to try a new hobby while staying at home. However, this usually means they need the tools and materials for it, delivered to their homes. As these products are not considered as necessities many companies are…
This is an easily scalable version of Mark Rober's compliant Nerf gun. The main reason for this is that it is flat, so it scales way easier than a version with facets. This means you can also laser cut it! The default scale is fullsize…
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
3D Model of XCE & XFE Dimensions: L-214mm, W -87,36mm, H -74mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX machen and part of the Discover. Create.…
This case was designed for the xFlasher 360 (an all in one Xbox 360 NAND reader/writer) It was created with injection molding in mind so the tolerances are very tight. To print this you will need a high resolution SLA printer. For lower…
For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount
These are just the pads that I own that I can confirm fit on. I made these like a year and a half ago so memory is fuzzy but I made all of them except the stock XR. If anyone remembers where that came from I can tag the OG. Otherwise have…
A can holder that clips on the top of your 2013-2014 XF/M (likely more years and models compatible) gas cap. The holder accommodates a 355 ml can with neoprene koozie. 3D model found here if you want to tinker -…
This is a simple Arduino MEGA schematic symbol drawing template. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 2-3 shells maximum. Remix Culture Approved! - To aid in remixes from the community I have…
Downscaled to Z scale. Tractor details were reinforced so could be printed at this scale. Trailer was designed mainly from photos and actual fuel trucks specs.
Fits onto the right side of the Gallet F1 XF helmet, designed to hold a circular torch of a diameter of 38mm with the opening to be cut to size for either a snap fit or a removable on pull fit. I can do a revision of the item if anyone…
Add a stock to your MatrixFire by removing the orange sling point. Update 27Dec2022: Split files for printing in two pieces. Gives an uglier print, but is MUCH stronger than the single piece. Requires 3x 7/8" 4-40 screws to attach.…
Quick wall mount for the Rogers/XFinity XB7 modem. I'd recommend the halo for high traffic area's; otherwise you should be good. I'd recommend 0.2 layer height with 3-paramiters. 25% infill should be good.
Based on the Vallejo Paint Rack from Stu Cameron a paint rack for Tamiya 23ml X and XF paint bottles.
Hey there, Got a Rollei XF35 on a flea market and couldn't find any similar battery, so i redesigned the original cap to fit a LR44 battery instead. Light meter now works fine, but remember to compensate by adjusting the ISO/ASA of you…
Cordless tool battery adapter. Xfinitiy (Aldi) Battery to Ozito (Einhell) Tool Inspired by: https://www.thingiverse.com/thing:3509025 https://www.thingiverse.com/thing:1534660 https://www.thingiverse.com/thing:4239972 (retention tab)…
Cordless tool battery adapter. Ozito (Einhell) Battery to Xfinitiy (Aldi) Tool Inspired by: https://www.thingiverse.com/thing:3509025 https://www.thingiverse.com/thing:1534660 https://www.thingiverse.com/thing:4239972 (retention tab)…
LEGO DAF XF 105 FT 410
A low-profile solution for affixing antifog to protective goggles. I really like the super-low profile airsoft eye protection options (such as the smith optic boogie ventilators), but they all suffer from the same severe fogging issue.…
Was looking for a stepped type organizer for my small collection of Tamiya X and XF (23ml/40mm dia) line of acrylic model paints and couldn't find exactly what I was looking for to print on my Prusa Mini+, so I made one! Stepped design…
This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…
Remix of https://www.printables.com/model/273343-car-cup-holder-bottle-adapter-nalgene-yeti-rambler/comments with slightly larger ID to hold large Contigo rambler. Closed at the bottom to capture any spillage. With Jaguar XF logo or…
Why and what for. After installing the Quickswap kit I needed to adopt a few things for my own tooling. This should also work with Snapmaker Ray if you want to install the 10W module. The models attached include: Exact replica of the…
Bike Wall Art for CNC or Lasercutter dxf/svg Thanks @GCodePrintr for the nice Design
You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…
Redesigned XB7 wall mount with additional support.
I’m a 3D printing and laser cutting hobbyist, and I wanted to build a lightweight, sub-250g RC plane inspired by the classic Super Cub. While plenty of free plans exist, I found most were either too complex or not optimized for a simple,…
Chibi model of the anime character SpyxFamily.
We recommend you to print with PLA/ABS/Nylon
Made this quick and simple TV Box mount that fits the Xfinity/Ignite Box into it..
Important note on the files: In the “Other Files” section there are three sets of ZIP files with all the objects bundled by type (4 zip files by set). Two of the sets include a recycling symbol in the objects: either PLA, code 7, or PETG,…
I use a Glowforge laser cutter, which works from SVG files. I converted the DXF to SVG, and I am sharing it so that others don't have to deal with the hassle. Print instructions This is the face shield laser cut file, converted from DXF…
I found a couple prints floating around for sale on Amazon but they were meant for cans, I wanted to be able to take my Contigo go cup full of coffee on the trail with me. Fits two styles of the Contigo cup, they are both a few years old…
The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…
The SDrive-MAX is an amazing device for your Atari 8-Bit; think of it as an unencumbered, open source, enhanced version of your SIO2SD. For all its awesomeness I felt the available case designs were letting it down a lot. I’ve been…
Phase ONE XF waist level viewfinder a non-finished but useable project
Share a Like please. Modelo criado para um camião Daf XF 2017 para servir de suporte para um tablet de 10''. Model created for a Daf XF 2017 truck to support a 10'' tablet.
Jaguar XF X250 right hand drive (UK, Cyprus, Aus, Japan etc) phone holder for a BV9900 phone. None of the designs i could find allow the odd shaped "cubby" to be closed when not in use, this design does, I've spruced it up a bit with a…
I'm not a fan of cluttered handlebars - this mount uses one of the headlight mounting bolts to keep the controller for Oxford heated grips up by the display on the 2023 Tenere 700. I'm not sure if this will work with earlier year models -…
This project is a reverse-engineered version of the XXXFPV Bone Frame, designed for those who can't find the original anymore. It includes multiple versions of the frame to suit different needs and manufacturing methods, as well as…
This is a PCIe bracket for Intel XF SR based networking cards. These are similar to the Intel X520 but use XFP/QSFP+ List of compatible devices: Intel XF SR 10Gbe IBM 5772 This may work with other Intel 10Gbe XFP based cards but has only…
Hi, I prepared the remix of the 'hanz_grau' case to be used for 2 USB module version (XFW-KC42-2). The 2 USB slot board is smaller, so the dimentions needed to be adjusted. Materials needed: 4pcs countersunk head screw M3x6 4pcs M3 thread…
These spacers allow you to position a 400x400mm MECPOW honeycomb bed relative to the feet of the Creality Falcon 2. The outside dimensions of the bed are 440x440mm The bed is also raised a few millimeters to allow fumes to escape under…
Remix of a Vought Design (Charles H. Zimmerman). More: https://forum.flitetest.com/index.php?threads/ftfc18-wwii-vought-xf5u-flying-flapjack-designed-by-sp0nz-localfiend.36142/ XF5U is a Remix from a GrabCAD Model.…
V2 lépe sedí do helmy a lépe se do něj dává baterka. Tiskněte se 2-3 perimetry a výplní 35% aby zůstala zachována pružnost držáku. The V2 fits better in the helmet and the flashlight fits in better. Print with 2-3 perimeters and 35%…
Want to get your own build plate cut? This file will make it easy. Just send this to your favorite online laser cutting service and they'll cut a build plate out of the material of your choice.
Required materials About 120g of filament (assuming 15% infill) - PLA is fine, but PETG / ABS is preferable 3 x 120mm fans (not every single fan will be compatible; take a look at the instructions for further detail) 12 M3 Heat Inserts…
I pulled off the foil on the standard print bed and glued it to the GFK plate with 3M 468MP transfer adhesive foil. I sanded the GFK plate with 120k sandpaper and cleaned it with isopropanol.
Update 8/21/23 : Realized I had the wrongly scaled the DXF and it was 10x size. Fixed that in an updated version here. Just a simple DXF that gives you the dimensions for the Bambu plate geometry. Useful in cutting applications.
Brake hose holder for Kawasaki KXF
Easy to print Öhlins RXF 36 mudguard. Öhlins logo is debossed. You need 2x small 3x16mm screws and 3x M5x20mm screws to assemble and install the mudguard. Additionally you can fix 2 tie wraps to the lower legs. I printed the mudguard in…
Print in PETG or ASA. Put two 6x3mm neodym magnet in each hole. Put a little drop og glue on the back of the outer magnet and hold it to the AUX fan casing, when this sticks, remove the cover and glue the inner magnets in the bottom of…
I prefer laser cutting 2D objects, hence made a DXF file. Custom Section Category: Models
Air tool holder designed to accept up to 5 XF-Euro adapters. Inspiration taken from Air Tool Hanger by Forker45 | Download free STL model | Printables.com Print Instructions Printed in PLA at 0.2mm layer, 20% infill. No supports Required.
Arris XB6 cable modem wall mount. For Bluecurve, Helix, and Xfinity modems. Print Settings Supports: No Infill: 25 Category: Organization
Probably a bunch of people in Australia wanting this, all the other parts are from the donor object this was remixed from. Remixed from (Thingiverse remix linking not working for me): https://www.thingiverse.com/thing:2007996…
Xfinity Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…
Flashlight holder to mount Xfinity X1 flashlight on the wall. Costco sold these for a while but they are also available on amazon. Neatly store your flashlights and extra batteries. Modify it yourself: Tinkercad
Extra long screw, less tight. Two-part screw with a knob for gluing.
During the pandemic, I upgraded my home office sitting situation from a folding chair to a Hyken Mesh Flexfit office chair. The chair itself was well reviewed for tall people and overall it has been good (get the roller-blade wheel…
Xfinity Battery to Dyson V7-8 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…
The 1:76 scale Oxford Diecast cars come with a nice display case. Re-use the case for a small diorama with this street. The plastic casing snap on this print. The empty spaces are for Manhole covers and water access plates, which are…
Extended battery door for the Adventure Force Matrixfire Update 27Dec2022: Increased clearances, added detailing. Experimental “Sling” version added (This is untested as of yet). Step file included. Printing -Orientation: as it is in the…
This case was designed for the xFlasher 360 (an all in one Xbox 360 NAND reader/writer) It was created with injection molding in mind so the tolerances are very tight. To print this you will need a very high resolution SLA printer (4K…
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
kalendar laser cut poplar plywood thickness 3.6 mm size 32 x 17 cm LightBurn laser 30W power 100% speed 300 mm/min passes 3x Category: Decor
The Expeditionary force uniform patch from the series by Craig Alanson. Printed with a 0.4 nozzle. 2nd color change uses phosphorescent PLA for a glow-in-the-dark effect.
A redesigned nose for T2 Cruza to fit the CaddxFPV GM3 gimbal.
