MSA Hardhat Face Shield Fix
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.21 net (excluding VAT)
For file: Mesh Shield Retainer Both Parts_0.4n_0.2mm_PLA_MK4IS_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fix for the face shield coming undone at the ends on MSA Hardhat Visors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I use the mesh face shield and face shield bracket for a full brim MSA helmet when running a chainsaw. When I raise and lower the shield, as well as wacking though branches, the corners of the mesh shield pop out from the frame. This model is a fix for that. It prevents the shield from popping off of the alignment studs. It should fit most MSA plastic face shield frames, besides for the H series of helmets.
Printing:
Mirror the model to get the part for the opposite side.
Print 100% infill