1 / 3
Ring Frizbee
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a frisbee that I modeled for fun and tested with TPU/PETG. They both flew great although the PETG was brittle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 60
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Public Domain
This was printed with PETG/TPU although the PETG was not well suited as it is quite brittle and smashed to pieces as soon as it came into contact with a fence. I would recommend printing with TPU or ABS maybe PA… but feel free to try whatever you have on hand. PLA likely is not a good choice though so if that is what you have I would invest in some better materials. If you like this model leave a like at least! (Its not that hard and it helps me...) if you dont then maybe you are just lame;)