Ring Frizbee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a frisbee that I modeled for fun and tested with TPU/PETG. They both flew great although the PETG was brittle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
This was printed with PETG/TPU although the PETG was not well suited as it is quite brittle and smashed to pieces as soon as it came into contact with a fence. I would recommend printing with TPU or ABS maybe PA… but feel free to try whatever you have on hand. PLA likely is not a good choice though so if that is what you have I would invest in some better materials. If you like this model leave a like at least! (Its not that hard and it helps me...) if you dont then maybe you are just lame;)