OrangeStorm Giga Enclosure Top
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed top parts for OrangeStorm Giga allowing for an enclosure lid.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 155
- Makes
- 0
- Views
- 1,090
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For building an enclosure for the Elegoo OrangeStorm Giga, these parts raise the top of the printer so that a top panel does not impact the gantry and the maximum print volume is unaffected.
All parts fit within the build volume of the OrangeStrorm Giga.
Printed in PETg for durability, 15% Cubic infill. Threaded inserts were used in the four corners to screw the enclosure top to the printed parts. M4 screws used.
The top sheet is 3mm acrylic, 1200 x 1075mm.
Zip ties are used to secure the 3d printed parts to the Giga frame however small screws can also be used, these are optional extras as the weight of the print and top acrylic sheet do keep it in place.
Included is the STEP files, I recommend checking dimensions against your printer and adjusting for tolerance if needed.