1 / 4
OralB Charger Holder for type E plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Loved the model but it did not fit into my Belgian plug.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Loved the original model but it did not fit in my Belgian plug due to the ground pin of the wall socket.
I moved the threaded holes to the left and right, and added a large hole in the middle to accomodate the ground pin of the wall socket. I used two M3x25 screws (M3x20 should be fine as well), 2 nuts can also be added but are optional since the holes are threaded.
I also printed the bottom side to hide the cables better.
Printed fine in PETG without supports on MK4S.