1 / 17
Benchski - remixed 3DBenchy - extreme test of nearly impossible overhangs — image 1
1 / 17

Benchski - remixed 3DBenchy - extreme test of nearly impossible overhangs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If yours can do the steep overhangs at fronts of the skis, without any noticeable sag, then you have one amazing printer

Rating
0 / 5
Likes
25
Downloads
44
Makes
0
Views
342
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Share Alike

If your printer can do the steep overhangs at the fronts of the skis, without any noticeable sag, then you have one amazing printer.

I'm including a couple of OrcaSlicer .3mf files. See below for more details.

I did two prints in PLA: one at 0.28 mm layer height, and another at 0.12 mm layer height. Obviously the appearance and aesthetic quality was better on the second print with the thinner layer height — it was more than twice as many layers and took more than twice as much time (1 hour and 7 minutes compared to 35 minutes for the thick layer height). 

Both prints were done on a standard, stock Flashforge Adventurer 5M, a fast CoreXY machine, of which I have three. If you are interested in one, here's an affiliate link: https://amzn.to/3DoF6at .

The prints were made using their stock 0.4 mm nozzle, and using an OrcaSlicer print profile provided by Flashforge, with essentially only one change: the layer height was first increased from 0.2 mm to 0.28 mm, and then decreased to 0.12 mm. Also, I did literally no post processing of the resulting print — I did not even remove little wisps from where the nozzle retracted, etc. 

This first batch of attached photos is the 0.28 mm layer height:

This second batch of attached photos is the 0.12 mm layer height:

Change log:

  • February 27, 2025 - moved the center ski forward a bit, as it was interfering with one of the letters on the bottom of the boat.
  • February 27, 2025 - initial upload