1 / 3
Kids First Intro to Gears Replacement bars
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We got a used set that was missing the medium bar and two shorter bars.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Public Domain
Replacement posts for Kids First Intro to Gears set. I printed at an angle with ABS (see photos). These were pretty difficult to print at an angle but I couldn't find a better way to get the posts to print fairly cleanly. Supports around the bases will help. Brim will do nothing for you here because of the narrow point of contact on the bed.
- Supports: Support enforcers only; see photo; snug, 0.2mm top/bottom distance, 1 top interface layer, 3 bottom interface layers
- Infill: 20% gyroid
- 0.2mm layer height (Strong profile if you have one)
- 6 minimum walls
- 5 top layers, 3 bottom