Cable Winder - Multiple Pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom approach to cable winding, utilizing various pieces and suitable for different connector types.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 95
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
After relying on other people's designed models, I decided to try creating a cable winder to suit specific needs that I could print with my current skills.
I wanted a design that avoids stretching cables by twisting them in the middle and winds different types of cables, disregarding their connectors. Another consideration was to avoid print-in-place because I'm struggling to get good results with my current printer and skills.
In my case, a simpler approach was to create three pieces that fit together with a notch and hole that only requires the cable to go into the winder while keeping the connectors out of it.
I was inspired by @mrusk's Next Gen USB (and more) Cable Winder / Organizer (Print-in-Place, Multiple Sizes, Stackable).
My original design is in Onshape's public space; you can find it here.
Printing
For the ones in the photos, I used PLA with a .4mm nozzle and .16mm layer, no support and 25% gyroid infill (which might have been too much).