1 / 13
Prusa Core One/+/Gen2 Single Wifi and GPIO Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design replaces the original Prusa Core One/+/Gen2 Wifi cover.
- Rating
- 4.966 / 5
- Likes
- 258
- Downloads
- 765
- Makes
- 57
- Views
- 3,869
- Reviews
- 59
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This design replaces the original Prusa Core One Wifi cover.
In a single cover it combines the Wifi and the GPIO interface.
ACCESSORIES
This part is secured with the original M10 SHCS screw
The GPIO card is secured with 4 x M3x6mm SHCS
RELEASE
19/04/2025
Modification of the internal geometry (removal of an unnecessary shoulder).
06/07/2025
Relocated the GPIO text and slightly enlarged the part to allow for the warranty label.
Added "PrusaCoreOne_GpioWifiCoverCap" file to protect the GPIO pins ; it is easier to remove it if the arrow is pointing up.