INR PILE-compatible shower razor mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.04 – €0.05 net (excluding VAT)
For file: inr_pile_knob_cover_0.4n_0.2mm_PLA_MK4S_59s.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.04 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shelf with a cutout slot for holding two razors.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Shelf compatible with Iconic Nordic Rooms INR PILE shower interior solution. This shelf is used to store two razors in your INR PILE system.
Stainless M5 nut and M5x20 bolt is needed.
Print instructions
- No brim or supports needed
- 0.20mm
- Nozzle: 0.4mm
- Print the bracket with 100% infill
- All other parts can be printed with 40% or less