P
PrintablesRC_3DWorks
Desk organizer - display shelves
display all your bits and bops on these shelves - 15 x 5 cm shelves
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
- Downloads
- 2,325
- Likes
- 810
- Rating
- 4.33
Search results: shelve
Counting matching models…
P
PrintablesLex
Skadis Containers and Shelves
Organize that Skadis! Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉 This design uses the Skadis T-Clip System by Will , you can download the required clips from there! You will need…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
- Downloads
- 541
- Likes
- 113
- Rating
- 4.75
P
PrintablesmoWerk
Mushroom Shelves Bathroom Edition (4 sizes)
Update Hollow version of all 4 sizes posted and tested. Stl, bgcode and 3mf files updated. Hollowing saves nearly ⅓ filament at roughly the same print time. Below pictured test print failed due to user error. But even with the 90%…
Print approx. €10.80–€13.20 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 539
- Likes
- 290
- Rating
- 5
P
Printablesmarcvivet
Keyboard shelve
Keyboard shelve to free space on your desk
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 282
- Likes
- 71
- Rating
- 5
P
PrintablesConr8r
Labeled Hex Shelves (Parameterized)
Introduction I designed these hex shelves to organize my benchy collection. I wanted a way to record both the material properties (manufacturer, material, color name) while displaying a benchy and this was my solution. I have uploaded…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
- Downloads
- 253
- Likes
- 107
- Rating
- 5
P
PrintablesJohn Gef
cardboard shelves
cardboard shelves from up-cycled cardboard boxes. organize your stuff with up-cycled cardboard boxes in a construction similar to dexion. assembling time, approximately 1h30m (for 3 shelves) what you will need to buy (approximately 3€)…
Print approx. €9.01–€11.02 excl. taxPreliminary estimate for one variant
- Downloads
- 252
- Likes
- 224
- Rating
- 5
P
PrintablesFifthbear
HSW bearing shelve
shelve for 608-xxx bearings.(22mm diameter) -PETG 4x perimeter
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 239
- Likes
- 60
- Rating
- 5
P
PrintablesBIrwin
Prusament Spool Shelves
If you have loads of Prusament Spools leftover and want to make something out of them, Try this set of shelves for displaying your prints. The Leg connectors are for connecting two legs together or for the top shelf. The shelf connectors…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
- Downloads
- 217
- Likes
- 118
- Rating
- 4.8
P
Printablespovsky
Lazy Susan Spice Shelves
This is a spice shelf for the standard diameter spice containers. They lock together using the tabs on the bottom to form a full circle. You'll likely need to adjust the diameters for your specific application.
Print approx. €9.56–€11.69 excl. taxPreliminary estimate for one variant
- Downloads
- 158
- Likes
- 55
- Rating
- 3
P
PrintablesXDEnte
Robuster Regalwinkel für DIY-Regale – Sturdy Shelf Bracket for DIY Shelves
Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
- Downloads
- 153
- Likes
- 19
- Rating
- 5
P
PrintablesJoe McCarthy
MGA's Miniverse Make It Mini Lifestyle Larger Shelves
MGA's Miniverse Make It Mini Lifestyle comes with shelves however some of the toys don't actually fit on them. So this is a larger version of what the shelving that comes with the toy so the toys actually fit on it.
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
- Downloads
- 146
- Likes
- 34
- Rating
- 0
P
Printablesgdownton
Bose Companion 2 Speaker Wall Shelf / Shelves - Versions 2-4
Version 1 of these shelves (https://www.printables.com/model/134832-bose-companion-2-speaker-wall-shelf-shelves) has shorter sides such that the cantilever dips 1-1.5mm. They hold up for at least 10 months in service but I wanted to make…
Print approx. €10.27–€12.55 excl. taxPreliminary estimate for one variant
- Downloads
- 141
- Likes
- 19
- Rating
- 5
P
PrintablesBrad
Hook for Container Store Elfa Closet System Wire Shelves
Simple clothing hook. Clips on to the Elfa wire shelves that the Container Store sells for custom closets. The hook can slide forward to hang things or backwards to be out of the way. Able to hold a shirt, pants or hat. Not for heavy…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
- Downloads
- 126
- Likes
- 39
- Rating
- 5
P
PrintablesRobertusMaximus
Patch Cable Hooks for wire shelves and tool box
Sometimes when you're making music or killing mutant aliens far off in the Science Fiction future, you just need to hang your cables! This is especially true ( downloading it from the Internet and printing it twice makes it extra true )…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
- Downloads
- 108
- Likes
- 19
- Rating
- 5
P
PrintablesSteveW91
Organising Shelves for 1535 Pelican Case Air
This organiser fits in a Pelican Case Air but requires printing in two parts. It has holes in the sides that join the two parts using brass set nuts but I also melted the seam together with a soldering iron. Prints without supports but I…
Print approx. €6.51–€7.95 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 105
- Likes
- 38
- Rating
- 0
P
PrintablesRB3D
(No support) Open-Shelved Pencil Holder
Introducing the modern, minimalist pencil holder that's sure to elevate your desk setup. This design features a series of cutouts, each with a hole in the center, stacked on top of one another and spaced apart to create a visually…
Print approx. €11.36–€13.88 excl. taxPreliminary estimate for one variant
- Downloads
- 104
- Likes
- 23
- Rating
- 0
P
Printables{cad_coder}
Citadel paint/model shelve unit
Paint stand This is my own design from scratch but I would like to first credit @jonnyboy_star_535044 on Printables for inspiration. This is designed to print on a 220x220mm print bed, without supports. I have made the joins quite loose…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
- Downloads
- 91
- Likes
- 12
- Rating
- 0
P
PrintablesMilan
Mounting hooks for heavy load shelves
Simple mounting hooks to screw on to boards, tools and accessories and mount them easily and flexibly to for standard consumer grade heavy duty/heavy load shelves. They work either on the in or the outside of the shelve systems. To change…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
- Downloads
- 83
- Likes
- 36
- Rating
- 5
P
Printablesredaeq
Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia)
Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
- Downloads
- 73
- Likes
- 6
- Rating
- 0
P
Printableseponymous
Single-Width Modular 006/007 Shelves
I wanted to throw a shelf on top of my new Modular 004 unit, but the only original ones were double its width, so I took the Modular 006 and 007 shelves and cut them down to the correct size. For the 007 shelf, I also made versions with…
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for one variant
- Downloads
- 63
- Likes
- 10
- Rating
- 0
P
PrintablesPepo Aliaga
Table & Shelves - KNAGGLIG Ikea Mod
I have designed these 3D printed connectors to improve the function that is usually given to Ikea KNAGGLIG pine wood boxes (art. no: 702.923.59), such as shelves or small tables. With them you can join two boxes, and with a simple…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
- Downloads
- 61
- Likes
- 35
- Rating
- 0
P
PrintablesV1nce78
Voronoi Shower Shelve XXL 25mm
An XXL version, that fits quite a lot of bottles. I printed it with solid infill, to make it extra strong. The amount of filament was not that much (225 grams) for something that is used every day. I opted for PETG. And just as CrashKG…
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 56
- Likes
- 11
- Rating
- 0
P
PrintablesMitchell Takes
Connical Shelf holder for Metro Shelves
This is the piece of plastic hardware you need to add shelves to a metro shelf system. Print a few for spares or a new shelf rather than purchasing them and save a few bucks! Thanks for looking and please let me know if you have any…
Print approx. €4.66–€5.70 excl. taxPreliminary estimate for one variant
- Downloads
- 54
- Likes
- 14
- Rating
- 5
P
Printablesvarkenvarken
Articulated arm clamp for 18mm bookshelves
A clamp to go with the Articulated Arm by Jack, with sizing suitable for a 18mm book shelf, like those of an IKEA Billy, but will of course fit any shelf with that thickness. The photo shows the clamp printed in Prusament Galaxy Black PLA…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
- Downloads
- 45
- Likes
- 11
- Rating
- 0
P
PrintablesFEworks
Corner Shower Shelves
Create your bathroom corner just the way you want it with modular, durable spaces. No glue required. Have fun!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 43
- Likes
- 12
- Rating
- 0
P
PrintablesAndoAndoAndo
openGrid Shelves for HotWheels (with Gridfinitity aesthetics*)
If you see my other 3D model , you might find that I have a lot of HotWheels, Tomicas, and other small car toys. And so when I printed [openGrid - Gridfinity shelves] by @DavidD , the 1x2 one, I thought “hey this is almost the size of a…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
- Downloads
- 40
- Likes
- 10
- Rating
- 0
P
PrintablesMurklock
CD Shelve
Need a CD wall holder and don't want to pay $30 or $40 for one? I got you covered ! You can print on any quality you would like. I printed it at Quality .3 ( Draft ) with 30% infill in PLA. For the rods I purchased a ¼ x 48 in aluminum…
Print approx. €5.03–€6.15 excl. taxPreliminary estimate for one variant
- Downloads
- 38
- Likes
- 32
- Rating
- 0
P
PrintablesOshi Kavadia
RepRack Cleat with mountings for key hole shelves
RepRack wall cleat with keys that slot into key hole mounts on my shelf frame instead of being screwed to the wall. Sliced laying down with supports for the new mounting points and a lot of extra perimeters and high infill. Printed on my…
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesMisterK
Filamentholder shelve
I wanted to learn how to use the toplogy optimization in Fusion360 and used the pc to design these extremely strong filament holders. They haven't had any problems since printing 2 years ago. I also added my own design. “filamenthouder2”.…
Print approx. €8.12–€9.92 excl. taxPreliminary estimate for one variant
- Downloads
- 35
- Likes
- 15
- Rating
- 0
P
PrintablesDark
Joints/mounts for shelves
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: I designed several joints for connecting square tubes and shelves, or to connect with Kallax shelves from Ikea.…
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 35
- Likes
- 12
- Rating
- 0
P
PrintablesChristof P.
Variable height fridge door shelve adapter for Siemens KG49E4ICA
This is a variable height fridge door schelve adapter that I designed for my Siemens KG49E4ICA fridge, but I guess this can be used with other Siemens fridges as well. I designed this because the predefined schelve mount positions were…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 32
- Likes
- 8
- Rating
- 0
P
Printableseponymous
Hook for Modular Shelving System 006/007 Shelves
This is a simple hook that clips over the edge of any Modular 006 or Modular 007 shelf wall, whether the unit is an original double-width version or one of my remixed single-width ones . The back is angled 8 degrees inward to allow the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
- Downloads
- 28
- Likes
- 7
- Rating
- 5
P
PrintablesVictor S
Simple and resistant adjustable shelves or tables
A year ago I tried to make some adjustable shelves and got into all sorts of complicated designs but in the end, the simplest design was the better. So, with just 3 small STL's(A1, A2 and B) and some wood you can make some really good…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 27
- Likes
- 35
- Rating
- 0
P
PrintablesAva
Quick cable hanger for closetmaid wire shelves
What? Hang cables from the underside of wire shelves. These cable hangers use the flexibility of plastic to secure the cables in a way where they're easy and fast to insert and to grab. Compatibility The cable hangers are designed for…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
Printablespatrickzell
Holder for shelves / Fachbodenträger geschraubt
Einfacher Halter für Fachböden zum Verschrauben mit dem Fachboden. Der Zapfen (5mm) wird einfach in ein vorhandenes Loch der Lochreihe des Korpus gesteckt. Mit 3mm Schrauben wird der Fachboden verschraubt. </hr> Simple holder for shelves…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesInterstellarDude
Ikea Ivar Shelves Durable Double Hook
Simple double-sided hook that can be easily put on Ikea Ivar vertical beam from any side - hence the double hook. I use it to attach a rubber band for some light phisiotherapy exercise. I hope it can withstand some moderate force, but…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 22
- Likes
- 9
- Rating
- 0
P
Printablestom
Sicherheitsbodenträger für Regalbretter/ Safety shelf support for shelves
Bei unserem individuell gebautem offenen Regal bestand die Gefahr, dass man die Regalbretter nach vorne herausziehen konnte. Um dies zu verhindern, haben wir diese Teile konstruiert. Da unsere Regale etwas unterschiedliche Abmessungen…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesSanAndreaP
Shelf Hook for (Glass) Shelves
A fully customizable hook designed to be clamped between wall and shelf. The shelf is ideally mounted as a “floating shelf” to make this work.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesTUS
3/4 iron pipe shelve support
¾ water pipe, steel pipe, iron pipe shelve support. can be screwed for additional safety
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesFiskarn
Rails for IKEA OMAR shelves.
The one negative thing with IKEA OMAR is that the back and sides are open. This is the solution. What you need: M3 nuts and bolts, 2-4 per clamp. Enough 10mm rods / pipes / … for the sides you want to put rails on. I used 10 mm aluminum…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
Printableskirloi
Batman shelve decor
Batman shelve decor for all the afictionados. The “claw” has 17.3mm inside, be free to do your own, the pegs are included so you can add them to your desired measurement.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
Printablesdonskoi92
Oral-B Bathroom Shelve Stand
My wife's toothbrus was constantly falling over, and it looked very disorganized. So I decided to 3d-print a base, that will fit existing bar mesh. Turned out great from the second try Printed with PLA, 0.3mm, no supports required Short…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesDHP
Filement Spool Rack / Shelve
The idea of this shelve goes back to a clothing rack. I used an oval pipe (30x16mm) and designed an wall mount and a spool holder The spool holder is a remix of the Prusa Mini Spoolholder (for assembly details see…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesJustKoala
Combinable Shelves
Summary It is a unique rack that can be combined each other. They are just the right size for personal items and are designed for easy placement on top of the towel rail attached on the wall. You can customize it vertically, printing only…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesMoeJ
NUC shelve unit
Designed a custom 3D model for a compact shelf that accommodates my Intel NUC and desktop speaker. The shelf measures 120mm in width, 120mm in depth, and 76mm in height, providing a sleek and organized solution for my desktop setup. Feel…
Print approx. €6.15–€7.51 excl. taxPreliminary estimate for one variant
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesDavid D
Multiboard gridfinify shelves
About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…
- Downloads
- 7,681
- Likes
- 1,328
- Rating
- 4.92
P
PrintablesChristian
Floating Honeycomb Display Shelves
Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…
- Downloads
- 5,201
- Likes
- 1,863
- Rating
- 4.92
P
PrintablesmoWerk
Mushroom Shelves with sturdy wall mount | Fungus Shelf
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
- Downloads
- 4,947
- Likes
- 1,667
- Rating
- 5
P
PrintablesMima19
Skadis Shelves
Shelf for Skadis board. Designed in 3 parts so you can easily use different colors. Short Shelf spans across 3 pegs and long shelf spans across 5 pegs. Pictures show stained wood PLA and black PLA.
- Downloads
- 4,136
- Likes
- 1,398
- Rating
- 4.75
P
PrintablesWarlogh
Set of various Shelves for HSW Honeycomb Wall
Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little…
- Downloads
- 2,573
- Likes
- 447
- Rating
- 4.95
P
PrintablesThomas McMaster
Spice Shelves / Spice Rack / Spice Organizer
Height is specified in the print file title. The shelves interlock, as shown. 3in and 6in tall shelves are shown. cabinet is 20.5" wide. Shelves allow for storage underneath them for duplicate spices or anything really. Feel free to…
- Downloads
- 2,559
- Likes
- 593
- Rating
- 4.73
P
PrintablesWebbez
Hexagon Shelves with LED & Cable management system
Create a stylish and functional display with our 3D-printable hexagon shelves. These modular shelves feature built-in LED lighting for an eye-catching effect. The cable management system ensures a clean and organized look, allowing you to…
- Downloads
- 2,274
- Likes
- 931
- Rating
- 5
P
PrintablesFxhDesigns
Honeycomb Shelves
Honeycomb Shelves with easy hang center hole. three sizes to download. Easily scalable to desired size. Small: 122mmx137mmx45mm Medium: 183mm x 206mm x 67mm Large: 244mm x 275mm x 90mm Pictured are mediums printed in Prusa black PLA.
- Downloads
- 2,247
- Likes
- 682
- Rating
- 4.71
P
PrintablesA4O Labs
Shroom Shelves
I really liked Shotime369 's mushroom shelf I cleaned up the geometry and made a few sizes (S, M, L) and mirrored versions for all three. The large size should just fit on an Ender / MK3 bed. No supports needed (really). Enjoy.
- Downloads
- 1,878
- Likes
- 923
- Rating
- 5
P
PrintablesKYZ Design
KYZ HSW Round Shelves - 8 Sizes
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
- Downloads
- 1,648
- Likes
- 463
- Rating
- 4.9
P
PrintablesSteve
SKÅDIS Mushroom Shelves
Assembly: Put some CA glue (super glue) in the holes and insert the pegs. I recommend gel super glue. 40, 60, and 80% scale use a single peg, so they're decorative only. Use “peg_short” for these. 100–200% scale use two pegs, and can…
- Downloads
- 1,611
- Likes
- 745
- Rating
- 5
P
PrintablesVeco
Desk Tidy Shelves
A desk tidy with slightly angled shelves and two spots on the bottom to attach to a desk with 25mm VHB tape (0.6mm indents). Print on its back (Hex side). I recommend 3D honeycomb fill with 10% infill and 3 walls/top/bottom. No supports…
- Downloads
- 1,551
- Likes
- 665
- Rating
- 5
P
PrintablesSoBaldrickEsq
Tamiya Paint Shelves for IKEA Skadis
These are Tamiya Paint Holders for use on IKEA Skadis pegboard. Skadis_Tamiya_2 and Skadis_Tamiya_4 are for the Mini 10ml bottles. Just added 23ml version, this is too big, cup inner diameter is 45mm.... v2 added, which should be inner…
- Downloads
- 1,345
- Likes
- 225
- Rating
- 5
P
PrintablesDavid D
Multiboard raw 6x3 shelve
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
- Downloads
- 1,340
- Likes
- 249
- Rating
- 5
P
PrintablesCasper
Dyson Airwrap Shelves - Holds seven attachments
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
- Downloads
- 1,324
- Likes
- 156
- Rating
- 4.75
P
PrintablesNerlin
Multigrid Shelves for the Multiboard Storage System
New: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head . You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the…
- Downloads
- 1,244
- Likes
- 208
- Rating
- 5
P
PrintablesAleks Plewinski
Gridfinity Storage Box Shelves (Parametric)
The existing shelves lacked consistency with the original container by Preb, so I designed a parameterized version that uses the same latches as the box to hold the shelf segments together. The top plate can also function as a Gridfinity…
- Downloads
- 1,157
- Likes
- 297
- Rating
- 5
P
PrintablesNozzleSting
45° Winkel mit Verstärkungsrippen für Regale <<>> 45° angle with reinforcing ribs for shelves
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
- Downloads
- 1,145
- Likes
- 386
- Rating
- 5
P
PrintablesNovaMatrix
Wall shelf bracket for ikea Burhult shelves
This shelf bracket is designed to fit the Ikea Burhult shelves( https://www.ikea.com/us/en/p/burhult-shelf-white-80400042/ ) But any shelf with the same dimensions will fit. The screw holes are made to fit screws with a head width of…
- Downloads
- 1,144
- Likes
- 468
- Rating
- 4.71
P
PrintablesPaul
roller shutter and shelves
I designed a few shelves for below my monitor with roller shutters and I integrated two USB-hubs. As mentioned in some comments, the whole thing is a little bit challenging to print and to be honest the roller shutters open and close just…
- Downloads
- 899
- Likes
- 633
- Rating
- 2
P
PrintablesDavid D
Multiboard shelves for multigrid bins
Warning: Those shelves are not meant for gridfinity. If you are looking for those, please click here . Also note that multiboard did change their bin design after I created those bins….so maybe use the official solution instead. About:…
- Downloads
- 890
- Likes
- 185
- Rating
- 5
P
Printables815 Design
Ikea Lack Table Storage Shelves
I was looking for a larger piece of furniture to throw some 3D Printers on and have plenty of storage. Many "lacked" the space I wanted, or were way out of budget. I'd previously built a Lack enclosure, and was extremely happy with the…
- Downloads
- 866
- Likes
- 556
- Rating
- 4.79
P
PrintablesDadBot3DP
Hexegonal Modular Shelves
I made this for my Brickheadz collection. The tolerances are very tight, they need to be, to keep the shelf sturdy enough once you start connecting more than a few of them together. They can be a little difficult to fit together if you…
- Downloads
- 860
- Likes
- 182
- Rating
- 4.5
P
PrintablesSteve 3d
Hexagon display shelves Customisable
Because we all know hexagons are the bestagons and tessellate so well I have designed a parametric openscad file to create hexagon display stand that fits into a shelf to display the things you collect, it is angled top to bottom to allow…
- Downloads
- 854
- Likes
- 460
- Rating
- 5
P
Printablesb-lud
Vinyl Record Shelves
Now Playing and Standard Vinyl Shelf to display record covers. Shelves are supported by standard Ikea screws. Material: PLA Layer Height: 0.16mm Infill: 50%
- Downloads
- 848
- Likes
- 178
- Rating
- 5
P
PrintablesSpongyBob
Corner Shower Shelves
This is a customizable corner tiered shower shelving system. This was intended for the corner of our shower, but you can create a corner multi-shelf system for anywhere. The Pieces: The system consists of basically feet, poles, shelves,…
- Downloads
- 814
- Likes
- 220
- Rating
- 5
P
PrintablesSzymon
Stackable miniatures shelves (25/32/40mm bases)
Set of shelves that can be stacked (almost) indefinitely. Designed for Warhammer 25, 32, 40mm bases. You may want to glue columns to the bases, but it is completely optional. Bases on the pictures were assembled without any glue. Only for…
- Downloads
- 791
- Likes
- 149
- Rating
- 0
P
PrintablesAnthony Compton
Modular Shelves / Customizable Spice Rack
This is a collection of shelves and legs/supports that fit together and allow you to build small custom shelving, perfect for small spaces like cabinets and small things like spices, paints, etc. The Fusion 360 file is also provided, in…
- Downloads
- 788
- Likes
- 502
- Rating
- 5
P
PrintablesMadP 3D
Small Shelves
Snap Together Mini Shelves Lightweight shelves to go on your shelves. (On the off-chance you sweat the small stuff) Long pegs are for middle shelves. I glued mine with CA glue for good measure. PLA Pro .2 Layer height No supports Enjoy! ……
- Downloads
- 760
- Likes
- 190
- Rating
- 4.75
P
PrintablesThreeD-Michael
Modular Shower Shelves
Update: I added a practical and sturdy Shower Head Holde r to this shelving system. You can find it here . This is an elegant modular shelving system for your shower rail. Features: two dish sizes, one for soap bars and a longer one for…
- Downloads
- 754
- Likes
- 176
- Rating
- 5
P
PrintablesCharles Regaud
BUNK | Stackable shelves for bathroom & kitchen
BUNK | Stackable shelves for bathroom & kitchen Compact and stackable shelves to help you organize your bathroom or kitchen counter. They print fast and are entirely support-free. There are 3 sizes for the stand, that can clip onto the…
- Downloads
- 752
- Likes
- 306
- Rating
- 4.8
P
PrintablesDavid D
Honeycomb storage wall (HWS) gridfinity shelves
About: Want to attach your existing gridfinity bins to your honeycomb storage wall (HSW) or just use the existing containers you already printed? This is just the right solution for you. Just download some HWS multiconnect connector ,…
- Downloads
- 752
- Likes
- 159
- Rating
- 5
P
PrintablesTal.vez3d
Skadis Shelves
This is a remix from Mima19. https://www.printables.com/model/280311-skadis-shelves I need the shelf to be a bit bigger, so did this 3 new sizes, a Short (L), Long (L) and Long (XL). 04/05/24 - Add extra support for the Shelf Long (XL)
- Downloads
- 656
- Likes
- 200
- Rating
- 5
P
PrintablesWyqid Wyzard
Shelf Hooks for Metal Wire Rack Shelves
These are simple and sturdy hooks that clip on to virtually all wire-rack type shelves that you find in closets, shop shelves, kitchens, pantries, etc.. You can use them to organize cords or hang tools or whatever. I use them a lot as I…
- Downloads
- 619
- Likes
- 146
- Rating
- 5
P
PrintablesGenerlAce
Mini Hexagon Shelves for Disney Doorables
I printed at .16 layer height, with 10% lightning infill as the objects I was putting on it are extremely light. Scaled to fit Bambu Print bed. can be mounted with command strips or a tiny nail. I am using command strips on mine. Can…
- Downloads
- 582
- Likes
- 66
- Rating
- 5
P
PrintablesTheNewRow
Modular Funko Pop Shelves
Modular shelf to house Funko Pops, expandable when needed. Uses 4x3mm magnets to hold the front. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 10% Filament: EcoPLA by 3DJake PLA Category: Household
- Downloads
- 553
- Likes
- 107
- Rating
- 5
P
PrintablesWarlogh
Gluestick or similar tube Shelves and Holders for HSW Honeycomb Wall
Here is a set of Shelves and Holders for your glue sticks or any similar size tools/items. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be…
- Downloads
- 548
- Likes
- 72
- Rating
- 4.63
P
PrintablesJavan
Swifty Album Shelves
Supports will be needed when printing the album name plates. No supports necessary for the shelf prints. Print with 0.20mm in either PETG and PLA. Album name plates are designed to be removed/replaced in case of accidental damaged during…
- Downloads
- 538
- Likes
- 26
- Rating
- 4
P
PrintablesJamesonThug
Mushroom Shelves with 12X3 Magnet Holes
I liked the idea of using these mushroom shelves to use as fridge magnets, but I prefer to use 12x3mm magnets, so I modeled some. I used the origional models as a starting point, repaired, reoriented them, then added the holes. The holes…
- Downloads
- 536
- Likes
- 184
- Rating
- 5
P
PrintablesSn1p3r_Pr1nt3r88
Mini Books For Mini Bookshelves
Cute little books for your cute little bookshelves: Easy-to-print quick customizable with: paint, stickers, the text feature in Bambu Studio, etc… Commercial Membership available at: https://www.patreon.com/Sn1p3r_Pr1nt3r88
- Downloads
- 491
- Likes
- 53
- Rating
- 5
P
Printableskevin
Funko Pop - Coffin Shelves
There are 4 total pieces, the full coffin is split into quadrants. Each piece should be printed in the orientation you download them in, no supports. Assemble them however you see fit, I superglued the top 2 together, then one of the…
- Downloads
- 486
- Likes
- 288
- Rating
- 5
P
PrintablesEmil T
Miniature Billy bookshelves
All the bookshelves are scaled 1:25, the tall ones have 7 fixed shelves and the low ones have 2 shelves. The dimensions should be fairly accurate and is based on the dimensions given by IKEA on their Swedish website together with my own…
- Downloads
- 430
- Likes
- 148
- Rating
- 5
P
PrintablesStangalang
Miniature Bookshelves with Book Blanks for Crafts
These are a set of three miniature bookshelves made for a crafting project. They can be scaled and used for tabletop games or possibly for kids toys/doll houses. The book blanks included are just small rectangles that fit on the shelves…
- Downloads
- 416
- Likes
- 185
- Rating
- 5
P
PrintablesORM
Trays and shelves for the Skadis board
I have made a number of models of trays and shelves to be mounted on the IKEA Skådis board. The collection of models are available in widths ranging from 40 mm to 120 mm and in depths of 40 mm or 50 mm. Installation The trays and shelves…
- Downloads
- 401
- Likes
- 117
- Rating
- 5
P
PrintablesMakerlab
Wall Shelves, Wall Hanging material racks, workshop organizer, workshop wall shelves, wall box, STL file Digital download, 3d printing
Duvar paneli kutuları, kendin yap, duvar malzeme kutuları, atölye duvar kutusu, atölye parça kutusu, düzenleyici stl dosyaları, Dijital İndirme, kendin yap duvar paneli kutuları. pratik ve kullanışlı. delikli paneller için delik askı…
- Downloads
- 391
- Likes
- 86
- Rating
- 4.33
P
PrintablesAaronLK
Shelve Bracket
For best strength print this with perimeters only. Use washers. If you get deforming over time (due to too heavy load or too high temperature) you can try PETG or ASA/ABS instead of PLA. With my use case (see picture) the bracket is…
- Downloads
- 390
- Likes
- 55
- Rating
- 5
P
PrintablesTom
Tamiya 23/10 ml paint shelves SKÅDIS
Tamiya modular paint system 23ml for IKEA SKÅDIS board. It contains one central module, it can be assembled in any length and finished with a left and right module. Update 27.6.2024 Added version for 10ml Tamiya mini paints
- Downloads
- 370
- Likes
- 49
- Rating
- 5
P
PrintablesBenjDavidson90
Clip-on solid shelves for Mini Warehouse
Solid shelves for @WimV's Mini Warehouse . They clip directly onto the horizontal beams (or horizontal beam/crossbeams I made). Both sizes are available (105 and 190). They are rounded at front and square at back (in order to make a…
- Downloads
- 366
- Likes
- 40
- Rating
- 5
P
PrintablesNaksi_CH
Modular book/manga riser for shelves
This is a simple and practical book riser designed to create a second row of books on a shelf – because hiding books behind other books is a crime.🙂 The riser is modular and consists of: -a center part (no side walls) -a left wall -a…
- Downloads
- 362
- Likes
- 52
- Rating
- 0
P
PrintablesWarlogh
Set of various Shelves for Multiboard
Set of six different style Shelves for Multiboard. This is similar set like I have done for Honeycomb storage wall (HSW) which can be found here . But in this set I have added one extra shelf and redesigned Shelf Nr6 to eliminate any need…
- Downloads
- 360
- Likes
- 81
- Rating
- 5
P
PrintablesDIYgrandpa
Oral B IO tooth brush holder shelve with charging station & toothpaste and brushhead storage
As there was no io holder yet perfect for my bathroom and application, I made this neat wall mounted station for my Oral-B io 8, it's charger and my toothpaste and brushheads, using two other models on thingiverse (links below). The plug…
- Downloads
- 355
- Likes
- 52
- Rating
- 3.67
P
Printablesmatrowgen
Cable Organizer for IKEA Desks & Kallax Shelves
Simple cable organizer designed to clip onto IKEA Langkapten desks and Kallax shelves. It helps to keep your cables in place and your setup a bit cleaner. The model was made in Blender using the CAD Sketcher add -on. If you want to edit…
- Downloads
- 352
- Likes
- 193
- Rating
- 5
P
Printablesgdownton
Bose Companion 2 Speaker Wall Shelf / Shelves
Inspired by the model “Wall shelf for speakers” by Arkadiy01. Resizing the original could have worked but remixing allowed me to make a few modifications. I added a 2nd screw hole, moved the angled side brackets in line with the back and…
- Downloads
- 339
- Likes
- 48
- Rating
- 4.5
P
PrintablesPrefectionist
Customizable Hexagon Shelves
These are customizable, scalable, wall mounted hexagon shelves. You can have just one small shelf at the bottom of the frame, one large one in the middle, or both. These are mainly display shelves. They are compatible with all other…
- Downloads
- 337
- Likes
- 88
- Rating
- 0
P
PrintablesStigern
Stackable Boxes/Shelves
Simple stackable boxes or shelves. Scaled at 60%. But scale them as you like. No supports needed.
- Downloads
- 328
- Likes
- 55
- Rating
- 0