Robuster Regalwinkel für DIY-Regale – Sturdy Shelf Bracket for DIY Shelves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stabile Regalwinkel in 2 Größen – einfach zu drucken / Sturdy shelf brackets in 2 sizes – easy to print
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 154
- Makes
- 1
- Views
- 476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Deutsch:
Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand.
Das Modell ist in zwei verschiedenen Größen verfügbar:
210 × 250 mm (für größere Regalbretter oder höhere Belastung)
160 × 190 mm (für kleinere Regalbretter oder platzsparende Anwendungen)
Die Konstruktion ist auf Stabilität und einfache Druckbarkeit ausgelegt.
Durch die großzügigen Befestigungsflächen lassen sich die Winkel mit Schrauben sicher an Wand und Brett befestigen.
English:
Sturdy and simple shelf bracket for mounting shelves on the wall.
The model is available in two sizes:
210 × 250 mm (for larger shelves or higher load)
160 × 190 mm (for smaller shelves or space-saving applications)
The design is optimized for strength and easy 3D printing.
The large mounting surfaces allow secure attachment to both wall and shelf using screws.
Empfohlene Druckeinstellungen / Recommended Print Settings
Material: PETG oder PLA (für höhere Belastung: PETG / ABS / ASA) / PETG or PLA (for higher load: PETG / ABS / ASA)
Infill / Füllung: 30–40 %
Wandstärke / Wall Thickness: mind. 3 Perimeter / min. 3 perimeters
Layerhöhe / Layer Height: 0,2 mm
Stützstrukturen / Supports: nicht erforderlich / not required