Counting matching models…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
Make sure your card storage system can accept 100 mm tall cards. Otherwise you will either need to sand a few mm off or cut some off the top/bottom to make it fit. Has a range of 70-140 mm. Printed with the flat part on the build plate…
This spacer keeps a monitor from rocking side if fine height adjustment is used. This is important for dual or triple monitor setups with non-matching monitors. The set screw allows setting the relative height between monitors. The issue…
Securely usb power bricks in all horizontal and vertical. For EUrostecker Type C (the thin ones without ground)
This package was developed at the Aquatic Germplasm and Genetic Resources Center (AGGRC) and designed by Sarah Bodenstein at the Louisiana State University Agricultural Center.
Use an M4 screw to set the correct clearance for the pen.
Update 31.05.2025: There is now a sealing ring that is placed between the individual elements. This ring additionally stabilizes the tower. The sealing ring have to be printed in TPU! My tower is getting on in years and the individual…
Improvements Improvements 4. 5. 2026 More photos of other details of the weapon. Inserts for removing various clearances in the weapon, mostly made of CU. The dimensions of the inserts work for my airsoft gun, yours may need different…
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers. There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly. 🔧…
Used to keep the vertical Elfa profiles from gliding sideways without drilling holes. To be glued with double-sided tape and fastened to profile with an M5x15 (or 5x20) countersunk screw.
This adapter is made for a ¾" (19mm) wooden dowel, fitting into 22mm Stackable Filament Rack brackets. When the adapter is screwed or glued onto the dowel, it prevents the dowel from slipping out of the bracket. Adaptations for other size…
Parts Needed M8 Nut M8 Bolt Self tapping wood screws x 2 Print Instructions Pause at layer 192 to insert M8 Nuts
Keeping a toddler's art station organized can be a challenge. This 3D-printable holder slides directly onto the wooden frame of the IKEA MÅLA paper roll holder [1], providing easy access to drawing tools without taking up table space. Key…
Anti-Roll-Stabilisatoren für meine 15l Tauchflasche Der Durchmesser der Flasche ist 204mm. Die Gurte gehen durch den Boden des Halters, damit sie u.U. noch durch eine Platte auf der die Halter verschraubt werden gehen können und somit…
Just print in TPU, No support needed. If you want, You can add a stop to the print and change color to black, To make a stripe that will help you distinguish between salt and pepper. Please let me know how you enjoyed it or if printing…
This caravan stabilizer has been mounted on my father-in-law’s drawbar since the 1990s. Over the years, the original pressure pads that clamp the tubes against the drawbar became brittle and eventually cracked due to age and exposure. I…
Remixed MagSafe phone stand with a 67.5° angle for better stability with heavier iPhones. F3D and STEP included.
This is a printable Stabilizer leg with optional Foot Rest or "Dead Pedal" that can be a great place to rest you feet if you don't have a clutch pedal or a mount for the pedals. No supports should be needed! The stabilizer can be…
I printed it with 7 wall loops and a line width of 0.5mm and an infill of 50% in PETG. You have to unscrew the three original rubber inserts before inserting. I printed 4 of the original feet and added this one to stablelize the feet.…
After a few times using the foot lever to open the lid, the trash can starts to tip forward at an angle. I made a crude insert to keep the bottom of the trash can to stay in contact with the wall.
My setup was top heavy so i made a 'leg' for the '2' high variant, and i shoved it under the adjacent basket
This stabilizing lip glues onto the top of dancan13f's Prusa Core One+ Top Filament Guide to prevent it falling off when loading filament. This has guides that fit into the magnet slots to assure that the lip is lined up correctly.…
UPDATE V5 - Added RIGHT Brace to support Logitech Cams - Brio100, C270, etc UPDATE V4 - RaspiCam Case - Added one more version that is flipped 180 degrees to have slightly more height - 5mm approx and added a ribbon guide UPDATE V3 - for…
Models include stabilizers for the stock Lectric XP2, Lectric XP3, and also the base by itself which rests against the rack spool so you can model your own wheel stabilizer onto it as needed. Note - the base is for the full spool; I…
Hi, i made this Stabilo Pen holder for your favorite 3 Stabilo Pens. The harder you press them in the harder it is to get them out :D (only a light push is needed). Its perfect if you are on the go and only need a few pens.
Über einen langen Zeitraum haben mich die Geräusche an der Z-Achse meines Prusa Core One gestört. Aus diesem Grund habe ich Z-Achsen-Stabilisatoren konstruiert, die diese Geräusche zuverlässig reduzieren und gleichzeitig für eine deutlich…
Dieser Küchenrollenhalter vereint ein minimalistisches Design mit hoher Alltagstauglichkeit. Er ist so konstruiert, dass er stabil genug ist, um das Abreißen von Tüchern mit einer Hand zu erleichtern, ohne dabei klobig zu wirken. Ein…
Installed linear rails to get rid of flexing of the workplate of my Snapmaker 2.0. The rail holders screw into the base of the linear modules, allowing an installation without drilling the base. This model is a re-design/remix to fit…
Could not find a item to do this so decided to design this myself will need tweeks.
I am the original creator. I designed and 3D printed some filler parts for Lightspeed's knee connection and Scattershot's lower waist connection. I also made some stabilizers for the elbow joints that slide out for Afterburner and…
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
remixed scuba tank wedges with open honeycomb holes
This lets you mount your ZSA Moonlander on tripods or arms that have the stabilization pins. I'm specifically mounting mine on the SmallRig Rosette 11" Magic Arms: https://a.co/d/08LQxkpj I printed them with: 0.2mm layer height 4 wall…
The Stabilo Woody 3-in-1 pencils are amazing for artists of all ages, but their round shape makes them prone to rolling off tables. This simple, slide-on cap acts as a reliable stopper, ensuring your pencils stay exactly where you put…
Hi i made this knurled pen grip for the Stabilo point88. The added thickness aswell as the knurling makes it much easyer to hold the thin pen.
Ich habe eine Netzteilabdeckung gebraucht für meine PSU Lüfter weil ich das Upgrade Stabilität Z-Achse Zugstange Kit verwende und keine Abdeckung gefunden habe habe ich diese Bearbeitet um es auch mit dem z-Achsen Kit verwenden zu können
This is just a cap for pen STABILO EASYoriginal. My son keep losing them in school. So I made this very simple and easy to print. I print them vertically with brim. PLA is enough. No big deal. Easy
My kids keep yanking or knocking cups and bottles out of the cupholders in the recliner and couch. I made this flexible insert to grip cups and stabilize smaller bottles and cans. I printed it with a .6mm nozzle and all walls. Feel free…
This is a universal 75x75mm stability mount designed to add a solid foundation to top-heavy decorative prints. While it works for various models, it was specifically custom-fitted for the Rose Decor by 29flo to prevent it from tipping…
The bottom of this play yard uses a small plastic piece to lock the segments together. If you misplace those pieces, they are impossible to find online. Here is my best effort's to create a replacement and so far they have been working…
This is just a quick and dirty fix to stabilize the 2Kg spool on spoolholder_spindle_2kg from
This model is a stabilizing end cap designed for diy filament dryers that use a threaded rod as a spool holder. The part holds a bearing inside the body, which helps the filament spool rotate smoothly while keeping it centered on the rod.…
Du suchst einen universelle Wandhaken? Hier bist du richtig! Mein superstabiler Hochleistungshaken ist universell einsetzbar, egal ob Garderobe, Garage oder Lager. Der Wandhaken wird mit zwei Schrauben befestigt und ist nicht nur für…
Did you buy a U.S. General magnetic tray from Harbor Freight? Are your screwdrivers flopping around in their holder? Look no further than this model here! It slides onto the sheet metal that already exists and provides some extra…
When "whacked" or "struck" from the side, this spreads the load across a much wider area of the top cover... HOPEFULLY saving me from a broken case! BNC-Female to SMA-Male adapter and Comet BNC-W100RX antenna This version can be TIGHT,…
Netzteilabdeckung das man das Upgrade Stabilität Z-Achse Kit benutzen kann mit Luftauslass nach hinten
Tired of the "Alzament Wobble" on your Mini? We all love the Alzament PLA for the good price, but if you are a Prusa Mini owner, you’ve likely noticed a slight compatibility hiccup. Because Alzament spools have a unique width and center…
Kurzanleitung: Schichthöhe: ≤ 0.12 mm Infill: 75% Gyroid Drucker gut kalibrieren Bett leveln für beste Ergebnisse Flugtipps: Leicht nach oben werfen, nicht zu stark Kleine Anpassungen an den Flügeln verbessern die Flugweite Egal ob Sie…
The Problem If you own a KingSong S18, you probably know the annoying rattle caused by the inner wheel cover. The original design relies on only two small screws per side, which often loosen over time, causing the fender to vibrate or…
This simple but highly effective system locks your office chair wheels in place without removing them. Just place the blocks under each wheel — the chair becomes instantly stable and won’t move, even under pressure.
I decided to hang a few of my guitars on one of my doors, but I soon realised that the guitars would sway all over the place and even sometimes fall off when using the door, so I designed some simple guitar stabilisers, works really well…
After a few months the IKEA Skadis Spool holder form alecs_from I'm using started to bend because of the spools applying constant downforce. So I designed a stabilizer "rod" that fits into the oval cutouts, to get the holder straight…
🪓 Axe Handle Stabilizer (Multi-Purpose Mount | No Supports) A simple and effective stabilizer designed to secure the lower end of an axe handle when mounted on a wall or cabinet door. Prevents unwanted swinging and keeps the tool firmly…
📝 Description These feet are based on the original Voron 0.2 design, but are slightly extended in height to improve stability and reduce vibrations. The increased height provides better ground clearance and a larger contact area, making…
📝 Description These TPU foot extenders are designed as a clip-on upgrade for the original Voron 0.2 feet . They attach directly to the stock feet, increasing the contact area and significantly improving vibration damping and grip. Printed…
This part is designed specifically for the Ender 5 Pro to solve a common issue: Bowden tube wobble between the extruder and hotend when filament is pushed. The stabilizer mounts onto the PC4-M6 fitting and secures the Bowden tube in place…
I wanted a stable spot for the top strap, as well as a mount for my USB hub, so I looked at other designs out there and designed this clip. There is a hole for an M2 bolt, for any additions you would want to mount to the side of the…
Short Summary "Stops your desk clamp from slowly walking off the edge. Mounts under the desk, clamp disk sits in a recessed pocket and stays put." Summary If you use any kind of desk clamp (cat perch, mic arm, monitor mount, etc.) you've…
This is a support to stabilize the Prusa MK4 / MK4S printer inside the original Prusa Enclosure. It helps to prevent the printer from shaking or wobbling. The supports are placed on the upper frame and push against the top of the…
Questo semplice oggetto mi ha permesso di fissare i 4 angoli della scatola che ho creato per proteggere la mia stampante dalla polvere. un piccolo oggetto ma a mio parere molto utile e con molte utilità, si può scalare e rendere di ogni…
The K10 has a poor printing quality due to the excessive play on the axis plastic sliders. A lot of the movement is caused due to the top feeding design, that restricts you small filament portions at a time. Changing the feeding direction…
This remix adds stabilizing feet to the build plate holder. There is both a version of the three plate holder with feet and just the foot alone (if you already printed the holder).
A remix of https://www.prusaprinters.org/de/prints/42868 by Radmaster and https://www.prusaprinters.org/de/prints/41894 by Zelrick This is a mix as two pieces that i like on my Prusa Mini ;-) The pieces have the same position and cant use…
Small Post-It box with a place to put Your STABILO fineliner. Scale as You need it and have fun Printing :)
The CR-10 SMART (the original one, not the Pro) utilizes a capacitive probe bed leveling system that uses the nozzle as the probe tip. The issue with the design lies in the fact that the mounting plate for the hot end must be able to…
The model is easy to print without support. The orientation of the model is already the right one. The only model I could find could not be printed without supports. I printed it in ABS with a 0.4mm nozzle and 0.2mm layer height. You need…
My roommate is filming stuff close to the ground with a telescopic gimbal he bought cheaple. (The gimbal handle is about 19mm diameter.) He needed something to stabilize the telescopic gimbal a bit more, so I designet this mount which can…
Crafted with a honeycomb structure, this wrist stabilizer offers exceptional strength and durability while significantly reducing its overall weight. The honeycomb design not only ensures optimal support but also allows for better…
Update: Adding a new base with large opening (from 40mm to 45 mm) for thicker bench top. The v-grove is removed in this base. Introduction: This is a versatile hand stabilizer that could be used in any shop that requires precise…
While drip tray is fairly stable if you place it atop a scale, I wanted some peace of mind while pulling espresso and swapping cups around. This model uses a 6 x 3mm magnet to attach the base to the drip tray. I've also uploaded a taller…
The Zero is the “single dose” version of the ubiquitous Eureka Mignon coffee grinder series. The overall build quality of this grinder is great and it quietly (and quickly for home use) produces fluffy, consistent grounds day after day…
Update: 10.July.2024: Small geometry changes for easier printing and assembly I have here two simple and inexpensive, but very effective and easy to realize solutions for frame stiffeners on old Musser M55 vibraphone frames. All you need…
(As I didn't have a long enough rectangular tube available, I used a longer end piece for the photos.) I have here two simple and inexpensive, but very effective and easy to realize solutions for frame stiffeners on old Musser M55…
The cutouts can be filled with lead or steel shot, or plaster, etc. to give the base some extra weight. I used lead pellets and filled the remaining space with black tinted epoxy.
Simple part to mitigate stock wobble on plastic Tokyo Marui style G3. Tested on JG G3. 0.2mm layer height, you can probably go bigger. No supports needed.
The bottom “cross” snaps into the net cup and allows it to get fixated. Without the stabilization, it fell over a lot in my DWC. The hole for the net cup is 50 mm diameter in size by default. You can also plug a few 5 mm wooden sticks…
The umbrella holder for my pool has a 1.75" diameter, but all the pool umbrellas I could find have a pole with a 1.5" diameter. This means the umbrella moves around a bunch, especially if it's windy. There are adapters online, but the…
The 3d printed part is NOT to be used on a Kerr Centrifico centrifugal caster. It's to be used to cast a metal part in aluminum or bronze to be attached to the caster via sandcasting. The intent is to reduce side-to-side movement for a 3"…
Boom tail support, for 450 class helicopters. 15g more than the original, but more “heavy”. Printed with 2 walls and solid infill (0.6mm nozzle) with PLA+
Horizontal Stabilizer XP4025 for 450 class helicopters 3 models: 1 the simple stabilizer 2 stabilizer with leds support 3 stabilizer with leds support and “curvature” for boom tail In the photo is the model 3 Printed with PLA+ 2 walls,…
A very basic wide foot or stabilizer designed to be sized for your use case. Im sure others have made something similar but i wanted to provide the most basic of design that can be sized to your needs.
My HBM foldable workbench was quite wobbly when I got it, so I decided to add some padding to the top of the legs to make it more rigid. Printed in TPU, as PETG proved to be too fragile.
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
Extra feet using the left over foam pads from the prusa enclosure build to stabilize the bottom of the enclosure, which otherwise can make the printer move quite a bit when printing. They are attached in the existing screw holes in the…
Settings: 0.20 mm layers 0.4 nozzle Seam: Back Supports: NO Description A simple and yet usefull model. Print with any material of your chose. I used Creality Silk Blue-Green PLA on Ender 3 V2 NEO
Auswuchtgewichte: https://www.amazon.de/gp/product/B00IJFXMIA/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Brussless-Motor: Kugellager:…
As I am switching to sidemount diving (from twin backmounted doubles), I now have the old problem of cylinders sliding around in the trunk of the car. I want to protect the cylinders, and my car, and I wanted something that would…
Pen Organizer For STABILO Woody 3in1 As already mentioned in the short description, I didn't like any of the current models. So I designed two versions myself. One version with space for 7 pens and one with space for 15 pens. The tip…
