1 / 16
Stable Wall Hook (15mm) / Stabiler Wandhaken (15mm) — image 1
1 / 16

Stable Wall Hook (15mm) / Stabiler Wandhaken (15mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.19 – €2.67 net (excluding VAT)

For file: WallMountHookPV_v00_0.20mm_Set2x_0.2mm_PETG#2_MK3SMMU2S_2h41m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.43 excluding VAT (range midpoint).

Weight reported by the author
27 g
Print time reported by the author
2.68 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Stable wall hook - fixed with 4.5mm countersunk head screws Stabiler Wandhaken - Befestigung mit 4.5mm Senkkopfschrauben

Rating
0 / 5
Likes
2
Downloads
9
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Motivation

Why should I design yet another wall hook? ... Well, because I intend to use it as wall mount hook for my solar panels (30xwxh) on a wooden wall, which requires well defined dimensions.



For my case, the base wooden planks of the base wall had slim 14mm thick  bars nailed onto the vertical joints between the planks.  
As the hooks are screwed to the base planks, I need hooks that compensate the 14mm height of the slim bars.

Print

The material recommended is PETG, as during usage the brackets have to support the weight of the solar panel.
The design allows printing without supports, but I recommend a 8mm brim.

Printed with SUNLU PETG (Black).

  [ Wall mount hooks]
  2x Wall mount bracket left   = WallMountHook_v00.stl
     (support:                  none)
     (brim:                       recommended but might be left out)
     (print orientation:   side face of hook down)
     (colour:                    Black or as you like ;-)

Assembly

Mount two hooks to the wooden wall with 2 countersunk head screws 4.5mm with suitable length.
I use two hooks for each solar panel.
Make sure the hooks are fixed at the same height for a solar panel.
Simply "hook" one solar panel onto these two hooks.

Tags