Stable Wall Hook (15mm) / Stabiler Wandhaken (15mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable wall hook - fixed with 4.5mm countersunk head screws Stabiler Wandhaken - Befestigung mit 4.5mm Senkkopfschrauben
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
Why should I design yet another wall hook? ... Well, because I intend to use it as wall mount hook for my solar panels (30xwxh) on a wooden wall, which requires well defined dimensions.
For my case, the base wooden planks of the base wall had slim 14mm thick bars nailed onto the vertical joints between the planks.
As the hooks are screwed to the base planks, I need hooks that compensate the 14mm height of the slim bars.
The material recommended is PETG, as during usage the brackets have to support the weight of the solar panel.
The design allows printing without supports, but I recommend a 8mm brim.
Printed with SUNLU PETG (Black).
[ Wall mount hooks]
2x Wall mount bracket left = WallMountHook_v00.stl
(support: none)
(brim: recommended but might be left out)
(print orientation: side face of hook down)
(colour: Black or as you like ;-)
Assembly
Mount two hooks to the wooden wall with 2 countersunk head screws 4.5mm with suitable length.
I use two hooks for each solar panel.
Make sure the hooks are fixed at the same height for a solar panel.
Simply "hook" one solar panel onto these two hooks.
