Z axis stabilizer - Ender 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable lead screw stabilizer for Z axis on Ender 3 pro or others. Uses 608 bearing.
- Rating
- 5 / 5
- Likes
- 129
- Downloads
- 879
- Makes
- 5
- Views
- 3,875
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is adjustable stabilizer for the top end of the Z axis lead screw on Ender 3/pro/…
!Before you install it make sure you have properly aligned your Z axis stepper or you will probably just make more trouble installing this stabiliser!
You will also need:
- 1x 608 bearing
- 4x M3x10 round head screw
- 2x M4x10 flat head with T nut
This stabiliser will make sure your lead screw end won't move any more which is important if you want to install single motor dual Z on your Ender. When you install pulley above the bearing it should also reduce banding from springy Z stepper shaft - not tested yet.
Also know that this stabiliser will reduce your Z movement to around 245 mm.
If you really like the design and/or just want to appreciate my work and time spend, you can buy me a coffee.