CANVAS PTFE Tube Stabilizer — Elegoo Centauri Carbon 2 (Filament Dryer Adapter Support)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the Elegoo CANVAS PTFE tubes rigid so you can attach a filament dryer coupler without bending them.
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 272
- Makes
- 2
- Views
- 2,435
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
The PTFE tubes coming out of the Elegoo CANVAS are short and unsupported. When you push a PTFE coupler onto them to extend the line out to a filament dryer, the tubes bend under the side load of the coupler and the extension hose. I didn't want to put unneeded stress on them, so I made this stabilizer to brace the tubes — the couplers sit straight and the dryer can feed cleanly into CANVAS. It includes an access channel so you can still pop the coupler off without removing the stabilizer.
Print settings:
Material: PETG
Layer height: 0.20 mm
Supports: none
Link to the model on TinkerCAD:
https://www.tinkercad.com/things/27u26bfJMxC-canvas-ptfe-tube-stabilizer-elegoo-centauri-carbon-2
Modify as needed.