1 / 7
Ender 3 - Z-Axis Bearing Stabilizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a z-axis stabilizer, designed to work with the bearings found in the fidget spinners you no longer use... 22mm…
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 448
- Makes
- 9
- Views
- 2,184
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This is a z-axis stabilizer, designed to work with the bearings found in the fidget spinners you no longer use... 22mm x 8mm x 7mm
I basically needed this to provide support for the Z-Axis Manual Adjustment Knob I added.
Enjoy
Updates
- v3 - 2019.03.23 - improved ability to print with no supports & increased depth by 2mm.
- v2 - 2019.02.03 - added 0.3mm between crossbar and z-axis lead screw.
Install
- Insert bearings into printed stabilizer
- Remove the 4 screws holding the top crossbar
- Slide the Z-Axis Stabilizer onto the left end of the crossbar
- Reattach the top bardo not fully tighten screws down yet
- Turn the z-axis lead screw until the assembly is close to the top
- Tighten down the 4 top bar screws
Now you can download and print baschz's Z-Axis Manual Adjustment Knob
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: 3D Printer Parts