CD Shelve
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.03 – €6.15 net (excluding VAT)
For file: cdrackwallholder_03mm_pla_mk3s_4h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.59 excluding VAT (range midpoint).
- Weight reported by the author
- 103 g
- Print time reported by the author
- 4.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Need a CD wall holder and don't want to pay $30 or $40 for one? I got you covered !
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 38
- Makes
- 0
- Views
- 1,214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Need a CD wall holder and don't want to pay $30 or $40 for one? I got you covered !
You can print on any quality you would like. I printed it at Quality .3 ( Draft ) with 30% infill in PLA. For the rods I purchased a ¼ x 48 in aluminum round bar ($6) and cut it in half. That gave me a 2ft CD wall holder that can hold about 60 CDs (give or take one).
Note you can buy any round rod that is ¼ some are stronger than others. I bent my rods up a bit in the middle to counteract middle sagging.
If you want the rods a specific color you can paint them any color you would like (I applied two coats of white spray paint and sealed it with two clear coats).
For mounting screw size please check the screw photo for dimensions you will need 4 screws.
For the holes I had extra white caulking laying around so I used that to fill the screw holes to have a bit of a cleaner look.
Lastly this holds any media that is longer than 146mm in depth (I currently have only tried CDs)
Thanks for checking out my work and have an awesome time printing!
Print instructions
This was printed at Quality .3 ( Draft ) with 30% infill in PLA