Kincony KC868-A6 case with device model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 129
- Makes
- 1
- Views
- 559
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6. A model is included to facilitate further modification.
No printing supports needed.
Some walls are thinned - they are translucent. Alternatively, they can be easily cut and an additional hole for the OLED display and RF module can be created.
Mounting holes are prepared for hot melt nuts M3. If you use a different base and cover connection system, the size of the holes needs to be adjusted.
BTW if you print from PETG, it is advisable to use Satin instead of PEI sheet. Otherwise, the print will stick too much to the sheet and when separating it, the thinned layer (in the area above the OLED display) may bulge - as can be seen in the photo.