1 / 2
Flyscreen aluminium extrusion corner joint - repair/replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The internal plastic corners that join flycreens become brittle and break. I have designed a replacement.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Our fly screens frames made from aluminium extrusion were broken as they became brittle. Finding a replacement internal plastic was impossible for me, so I designed a replacement.
To remove the old plastic I found two methods worked.
- Butane torch to heat the plastic so it wasn't as brittle, then fold the edges away from the aluminium and slowly remove it.
- Hammer the plastic remains in further to the extrusion. (I resorted to this after not being able to remove all plastic and found it was easiest).
Once the plastic is the removed, you just need to insert the new corners and re-rivet them in place.
It's the strongest my doors have ever been!
Printed in PLA (although PETG would withstand the heat for longer)
30% infill
Max printer speed settings.