Aqara H1 EU Double Rocker Wall Switch Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension for Aqara H1 to fix issue that two of them dont fit next to each other if the holes in the wall are too close.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
My holes from the original light switches were too close together to attach two H1s, so I made this to bring them out of the wall and have a protective cover.
Print Instructions
- The Outer Part needs to be adjusted in your slicer to the depth you need. Simply modify the depth to allow for enough clearance for the back part of the switch. I used 28mm but it might be different in your case.
- Duplicate the Outer Part and bring them close together in your slicer, so that they form one object. I have attached an Orca Slicer Project which did that.
- Optionally adjust the depth of the Inner Part to match your outer part
Assembly
- Ensure all Power is killed and really off :)
- Attach Outer Part to the Wall using original screws and feed wires through the holes
- Attach Switch (without front plates) to the Inner Part with some M3 screws and nuts. Make sure you get the orientation right to have space on top to access the screw holes.
- Connect the wires.
- Attach the Front Plates
- Push the inner into outer part. In my case they friction fit without issue but in case it doesn't, I guess you could put additional screws to the sides to ensure a permanent fix.
OnShape Project for modifications of Inner Part (I have no editable version of the outer part unfortunately): https://cad.onshape.com/documents/a8f74d877aa8c5af04f0a9c9/w/1af7c4fd971cac62b6d91b04/e/83f9de79b384bbfee5afb39b
If you like what I'm doing, please give it a like 👍 or consider buying me a coffee! 😃
