Æthervox EMF Microphone Enclosure & Mic Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure and microphone clip for the Æthervox electromagnetic field microphone
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the enclosure and microphone clip for the Æthervox electromagnetic field microphone which can be found here: https://git.sr.ht/~slyka/aethervox
The main body of the enclosure should be printed laying down with the switch/graphics side facing the bed and only needs a small amount of support inside the XLR jack. If the print bows up at the ends during printing use a brim to make sure it stays stuck down. If you want the version with the graphics print the graphics first, then print the rest of the model on top using a different color.
The bushings and cushion for the mic clip should be printed from a soft TPU. I'm using colorFabb varioShore TPU.
For the final assembly you'll also need an XLR plug insert with matching M2.5x5 screw and an M5x25 bolt, an M5 nut and a 5/8" to 3/8" mic thread adapter for the mic clip.
Source files for the enclosure and clip can be found here: https://git.sr.ht/~slyka/aethervox-enclosure