Æthervox EMF Microphone Enclosure & Mic Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure and microphone clip for the Æthervox electromagnetic field microphone
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the enclosure and microphone clip for the Æthervox electromagnetic field microphone which can be found here: https://git.sr.ht/~slyka/aethervox
The main body of the enclosure should be printed laying down with the switch/graphics side facing the bed and only needs a small amount of support inside the XLR jack. If the print bows up at the ends during printing use a brim to make sure it stays stuck down. If you want the version with the graphics print the graphics first, then print the rest of the model on top using a different color.
The bushings and cushion for the mic clip should be printed from a soft TPU. I'm using colorFabb varioShore TPU.
For the final assembly you'll also need an XLR plug insert with matching M2.5x5 screw and an M5x25 bolt, an M5 nut and a 5/8" to 3/8" mic thread adapter for the mic clip.
Source files for the enclosure and clip can be found here: https://git.sr.ht/~slyka/aethervox-enclosure