Transformer Re-winding Mandrel 2" x 1.25" x 1.625"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mandrel for re-winding Output Transformer from Leslie 122 amp. Mounts on 3/8" shaft or 3mm screws to flat plate
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Mandrel for re-winding Output Transformer from Leslie 122 valve(tube) amp, or any transformer with 2" x 1 ¼" x 1 5/8" core. Mounts on 3/8" shaft or 3mm screws to flat plate. This could be remixed easily to mount on other coil winding machines but I included a pair of 2.5mm holes threaded to 3mm - each located ¾" from centre - to screw it to a face plate rather than mount on a central spindle. The 3/8" hole might need to be reamed a tad.
Printed in PETG but should work fine with PLA etc. - no supports required if printed with flat mounting face down.