1 / 7
Datto ALTO 3 V2 Case - Simplified
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compared to my other model, this fits 2.5" drives more easily and this one does not require heatset inserts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Can use M3 nuts and M3 bolts from 16mm to 30mm in length.
The mesh is from the slicer settings: set the top/bottom layers to 0, infill at 6.5%, infill line multiplier at 3. Adjust based on preference.